PACMAN 20 EC

Explanation
PREPARATION OF PLANT PROTECTION PRODUCT FOR APPLICATION:

The plant protection product calculated over the recommended dosage is first mixed with some water in a separate container. The tank of the application machine is half filled with water. While the mixer of the machine is running, the mixture is added to the tank. The mixing is continued and the tank is completed with water. Mixing process continues until the application is completed. Use the prepared plant protection product on the same day.

Calibration:

Before the application, the calibration of the application tool should be done. The amount of mixture to be given to a certain area should be well adjusted in order to provide a good coating. Applications should be done in cool hours of the day in windless or less windy weather conditions.

CLEANING OF THE SPRAYING MACHINE:

Empty the application machine's tank safely immediately after the application is completed. After filling the tank with clean water, run the mixer and spray system to ensure all parts are washed. Do not wash near water sources. Do not pour the washing water and waste into water sources.

APPLICATION METHOD OF PLANT PROTECTION:

A good soil cultivation should be done before PACMAN 20 EC is applied. Then, it is applied immediately or 1-2 days before planting the seedlings to the field at the recommended dosage. The application is made on the soil surface after calibration with pulverizers drawn with tractors to use 60-80 liters of water per decare. Immediately after that, tillage or enough water is given, and the plant protection product is brought down to 10-15 cm deep. Since the product is tied to the soil in a short time, its mixing with the soil should be within the same day.

PACMAN 20 EC has an effect continuity of 2-4 months. On the other hand, there is no need to fight against other underground harmfulness where it is applied.

INFORMATION ABOUT RESISTANCE:

The plant protection product, PACMAN 20 EC, is a nematicide classified as Group 1 B according to its mechanism of action. Repeated applications of plant protection products with the same mechanism of action promote resistance development. For this reason, in order to delay the development of resistance, do not exceed the total number of applications of PACMAN 20 EC recommended in the same production season. In cases where the application should be repeated, pay attention to the use of plant protection products with a different mechanism of action (other than Group 1 B).

MIXTURE STATUS:

Since it is in the form of soil application, it is not possible to mix other plant protection products.

• Read the label first.
• Do not use at home
• Keep away from children, food and animal feeds
• Do not eat, drink or smoke during the application of the plant protection product.
• If the field is irrigated, do not put people and animals into the treated area until it dries.
• To prevent risks to human and environmental health, use as recommended and at the recommended dosage.

USE OF THE RECOMMENDED PRODUCTS ARE ABSOLUTELY PROHIBITED.

Rinse well by adding clean water up to 1/4 of the empty packaging of the product used. Pour the rinse water into the application tank. Repeat this process 3 times

POISONING SYMPTOMS:

Headache, dizziness, weakness, sweating, irritability, impaired vision and turbidity, diarrhea, difficulty breathing, saliva, vomiting, bruising, shrinking of pupils, tremors, twitching of muscles, contraction and reflex disorder.

FIRST AID MEASURES:

After Inhalation: Take fresh air after inhalation of vapors or decomposed products. If you are short of breath, have oxygen connected.

After Skin Contact: Dirty, contaminated clothing should be removed immediately. The skin should be washed immediately with plenty of soap and water. If symptoms persist or any uneasiness, see a doctor immediately.

After Eye Contact: Wash with plenty of water for at least 15 minutes and consult a doctor.

After Swallowing: Mouth should be rinsed with plenty of water. If the patient is himself, the doctor cannot be reached in a short time, if too much is swallowed and if the product is less than 1 hour swallowed, the person should be vomited. (Vomit should not reach the trachea) Resting, body heat loss should be prevented. A doctor should be consulted immediately and a safety data sheet should be displayed.

NATIONAL POISON CONSULTING CENTER (UZEM) 114

ANTIDOTE AND TREATMENT:

The antidote; ATROPIN SULPHATE and TOXOGONIN. Atropine sulfate can be given starting from 2-3 mg to 100 mg depending on the severity of poisoning. Doctor treatment is applied according to the symptoms and severity.

NATIONAL POISON CONSULTING CENTER (UZEM) 114

CONTENTS:

ethoprophos

WARNING WORD: DANGER

HAZARDOUS EXPRESSIONS (H)

H226 Flammable liquid and vapor.

H301 Toxic if swallowed.

H310 May be fatal in contact with skin.

H315 Causes skin irritation.

H317 Causes allergic skin reactions.

H318 Causes serious eye damage.

H319 Causes serious eye irritation.

H330 May be fatal if inhaled.

H400 Very toxic to aquatic life

H410 Long lasting, very toxic effect in the aquatic environment.

Precautionary Statements (P)

P210 Keep away from heat. - No smoking.

P273 Avoid release to the environment.

P280 Wear protective gloves / protective clothing / eye protection / face protection.

P303 + P361 + P353 IF ON SKIN (or hair): Immediately remove / remove all contaminated clothing. Rinse your skin with water / shower.

P304 + P340 IF INHALED: If breathing is difficult, take victim to fresh air and keep it in a comfortable position for easy breathing.

P305 + P351 + P338 IF IN EYES: Rinse carefully with water for several minutes. Remove contact lenses if fitted and easy to do. Continue rinsing.

P370 + P378 In case of fire: Use water spray, carbon dioxide, foam, dry powder for extinction.

P501 Dispose of contents / container to national regulations.

EUH208: Contains Ethoprophos. May cause an allergic reaction.

EUH401 To avoid risks to human health and the environment, follow the instructions for use.

MATTERS TO BE CONSIDERED WHEN USING AND STORING:

• It is poisonous to bees. Do not use the flowering time.
• It is poisonous to fish, do not contaminate it.
• Do not use empty product packaging for any other purpose. Dispose of it properly.
• Machines and tools used after product application should be washed with plenty of water.

STORAGE STATUS:

When stored unopened in its original packaging under normal (cool and dry) conditions, there is no change in the physical, chemical and biological properties of the product for 2 years outside the tolerance limits.

COMPANY STATEMENT:

The manufacturers guarantee the quality of plant protection products provided that they are sold in their original packaging. Manufacturers do not accept responsibility for any damage caused by improper storage and incorrect application of plant protection products or lack of compliance with recommendations.

LICENSE OWNER AND MANUFACTURER COMPANY:

ERTAR KİMYA Agricultural Products Tools Manufacturing Market. Singing.

ve Tic. Ltd. Sti.

Acıdere OSB Mah. Zafer Cad. No: 8 Saricam / ADANA

Tel: 0 (322) 456 19 44 Fax: 0 (322) 456 19 47

info@ertarkimya.com.tr www.ertarkimya.com.tr

PLANT AND HAZARDOUS ORGANISMS TO BE USED: