COMA 550 SC

Explanation
PREPARATION OF PLANT PROTECTION PRODUCT FOR APPLICATION:

The plant protection product calculated over the recommended dosage is first mixed with some water in a separate container. The tank of the application machine is half filled with water. While the mixer of the machine is running, mixed water is added to the tank. The mixing is continued and the tank is completed with water. Mixing process continues until the application is completed. Use the prepared plant protection product on the same day.

Calibration:

Calibration of the application machine should be done before the application. Mixing amount should be adjusted to provide a good coating in applications. Applications should be done in cool hours of the day in windless or less windy weather conditions.

CLEANING OF THE SPRAYING MACHINE:

Empty the application machine's tank safely immediately after the application is completed. After filling the tank with clean water, run the mixer and spray system to ensure all parts are washed. Do not wash near water sources. Do not discharge washing water and wastes into water sources.

HOW TO USE THE PLANT PROTECTION PRODUCT:

Apple-Red Spider and Mites: Application should be made when an average of 8-10 live individuals per leaf are seen in the periodic counts to be made on 100 leaves from the beginning of May.

Peanut-Red Spiders: If 8-10 pieces of red spider is detected per leaf in the counts to be made, spraying should be done.

Soybean-Red Spider: Spraying should not be done after the pods mature. Coating should be applied when there are 5 red spiders in one leaflet and 10 red spiders in the Aegean Region.

INFORMATION ABOUT RESISTANCE:

The plant protection product named COMA 550 SC is an acaricide classified as Group 12: B according to its mechanism of action. Repeated applications of plant protection products with the same mechanism of action promote resistance development. For this reason, to delay developing resistance, do not exceed total application number of COMA 550 SC in the same production season. In cases where the application should be repeated, pay attention to the use of plant protection products with different mechanism of action (except Group 12: B).

MIXTURE STATUS:

Except for alkaline plant protection products, pre-mixture test must be done without mixing with others.

• Read the label first.
• Do not use at home
• Keep away from children, food and animal feeds.
• Do not eat, drink or smoke during the application of the plant protection product.
• Do not let people and animals enter the field for 1 day.
• To prevent risks to human and environmental health, use as recommended and at the recommended dosage.
• It is strictly forbidden to use other than the recommended products.

Rinse well by putting clean water up to ¼ in the empty packages of the product used. Pour the rinse water into the application tank. Repeat this process 3 times.

POISONING SYMPTOMS:

No signs of poisoning have been detected in humans. If a discomfort is felt, consult a doctor with the label.

FIRST AID MEASURES:

In case of skin contact: Take off clothing immediately covered with medicine. Wash the parts that come in contact with the skin with plenty of water and soap.

In case of contact with eyes: Wash the eyes immediately with plenty of water and consult a doctor.

If inhaled: The patient is immediately removed from the spraying area and taken to fresh air.

If swallowed: Do not induce vomiting. Call a doctor immediately. Show the label of the medicine to the doctor.

NATIONAL POISON CENTER (UZEM) TEL: 114

ANTIDOTE and TREATMENT

It has no special antidote. Treatment is applied according to the symptoms.

CONTENTS:

Fenbutatin- Oxide

HAZARDOUS EXPRESSIONS (H)

H302: Harmful if swallowed.

H315: Causes skin irritation.

H317: Causes allergic skin reactions.

H319: Causes serious eye irritation.

H330: Fatal if inhaled.

H373: May cause damage to organs through prolonged or repeated exposure.

H400: Very toxic in the aquatic environment.

H410: Long-lasting, very toxic effect in the aquatic environment.

Precautionary Statements (P)

P261: Avoid breathing spray.

P273: Avoid release to the environment.

P280: Wear protective gloves / protective clothing / eye protection / face protection.

P312: Call the POISON CENTER or doctor / doctor if you feel unwell.

P391: Collect spillages.

P405: Store locked up.

P501: Dispose of contents / container as chemical waste.

EUH208: Contains Spirodiclofen. May cause an allergic reaction.

EUH401: Follow the instructions for use to avoid risks to human health and the environment.

MATTERS TO BE CONSIDERED WHEN USING AND STORING:

• It is poisonous to bees, fish and birds.
• Shake the packaging well before use.
• Follow the protection and protection instructions during application.
• Apply immediately after reconstitution without waiting.
• In case of spilling of the drug, absorb the absorbent materials (such as soil) and suck the drug and collect it in a 50 cm pit that will be dwelled away from the water source.
• Do not use empty medicine packages for any other purpose.

STORAGE STATUS:

When stored unopened in its original packaging under normal (cool and dry) conditions, there is no change outside the tolerance (tolerance) limits of the drug's physical, chemical and biological properties for 2 years.

COMPANY STATEMENT:

The manufacturers guarantee the quality of their medicines provided that they are sold in their original packaging. The manufacturers do not accept responsibility for any damage caused by improper storage of medicines or deficiencies in following recommendations.

LICENSE OWNER AND MANUFACTURER COMPANY:

ERTAR KİMYA Agricultural Products Tools Manufacturing Market. Singing. ve Tic. Ltd. Sti.

Acıdere OSB Mah. Zafer Cad. No: 8 Saricam / ADANA

Tel: 0 (322) 456 19 44 Fax: 0 (322) 456 19 47

info@ertarkimya.com.tr www.ertarkimya.com.tr

PLANT AND HAZARDOUS ORGANISMS TO BE USED: