BAZUCA M

Explanation
PREPARATION OF PLANT PROTECTION PRODUCT FOR APPLICATION:

The plant protection product calculated over the recommended dosage is first mixed with some water in a separate container. The sprayer tank is half filled with water. While the mixer of the machine is running, the mixture is added to the tank. The mixing is continued and the tank is completed with water. Mixing process continues until the application is completed. The amount of water to be used per decare should be 20-40 liters, and fan jet nozzle should be used in applications. The prepared mixture should be used on the same day. Applications should be done in cool hours of the day, in windless or less windy weather conditions.

CALIBRATION:

Calibration of the sprayer must be done before the application. The tank of the sprayer is filled with water to determine the amount of water to be used per decare. With this water, how much area is wetted is determined and the amount of water to be used in the application is calculated.

CLEANING OF THE SPRAYING MACHINE:

Empty the sprayer tank safely immediately after the application is completed. After filling the tank with clean water, run the mixer and spray system to ensure that all parts are washed. Do not wash near water sources. Do not discharge washing water and wastes into water sources.

HOW TO USE THE PLANT PROTECTION PRODUCT:

It is used in the period when weeds have 3-5 leaves. Two days before the application, the water in the pans is drained and the paddy is taken dry. Water is given to the pans again 48 hours (2 days) after application.

RESISTANCE MANAGEMENT:

The plant protection product named BAZUKA M is a herbicide classified as Group C3,6 + O, 4 according to its mechanism of action. Repeated applications of plant protection products with the same mechanism of action promote resistance development. For this reason, to delay developing resistance, do not exceed total application number of BAZUKA M in the same production season. In cases where the application should be repeated, pay attention to the use of plant protection products with different mechanism of action (Group C3.6 + O, 4 external).

MIXTURE STATUS:

The herbicide used in the proposed plants can be mixed with fungicide and insecticides. It is recommended to use the mixes without waiting. It is recommended to make preliminary mixture tests before making a large amount of mixture for application.

  • Read the label first.
  • Do not use at home
  • Keep away from children, food and animal feeds.
  • Do not eat, drink, or smoke during the application of the plant protection product.
  • Do not let people and animals enter the field for 1 day.
  • To prevent risks to human and environmental health, use as recommended and at the recommended dosage.


It is strictly FORBIDDEN to use other than the recommended products.

Rinse well by putting clean water up to ¼ in the empty packages of the product used. Pour the rinse water into the application tank. Repeat this process 3 times.

POISONING SYMPTOMS:

Headache, dizziness, weakness, blurred vision can be seen.

FIRST AID MEASURES:

After Inhalation: Calm the patient, seek medical attention, remove to fresh air.

After Skin Contact: Immediately take off any contaminated clothing. Wash the body parts that touch the medicine with plenty of water and soap for 15-20 minutes. If skin irritation persists, call a doctor. Wash contaminated clothing before using it.

After Eye Contact: Immediately wash the eyes and under the eyelids with plenty of water for 15 minutes. Remove contact lenses, if present. Get medical attention immediately.

After Swallowing: Immediately rinse your mouth and then seek medical attention for plenty of water. If swallowed, seek medical advice with the product label or this information form. Never give anything by mouth to the unconscious patient and do not force them to vomit.

ANTIDOTE and TREATMENT

There is no special antidote, treatment is applied according to the symptoms.

NATIONAL POISON CENTER (UZEM) TEL: 114

CONTENTS

Bentazone, MCPA

HAZARDOUS EXPRESSIONS (H)

H302: Harmful if swallowed.

H314: Causes severe skin burns and eye damage.

H315: Causes skin irritation.

H317: Causes allergic skin reactions.

H318: Causes serious eye damage.

H319: Causes serious eye irritation.

H400: Very toxic in the aquatic environment.

H410: Long-lasting, very toxic effect in the aquatic environment.

Precautionary Statements (P)

P273: Avoid release to the environment.

P280: Wear protective gloves / protective clothing / eye protection / face protection.

P301 + P330 + P331: IF SWALLOWED: rinse your mouth. DO NOT try to abuse it.

P303 + 361 + 353: IF ON SKIN (or hair): Immediately remove / remove all contaminated clothing. Rinse your skin with water / shower.

P304 + P340: IF INHALED: If it is difficult to breathe, remove the victim to fresh air and keep it in a comfortable position for easy breathing.

P305 + P351 + P338: IF IN EYES: Rinse carefully with water for several minutes. Remove contact lenses if fitted and easy to do. Continue rinsing.

P405: Store locked up.

P501: Dispose of contents / container to National Environmental Legislation.

EUH208: Contains Bentazone. May cause an allergic reaction.

EUH401: Follow the instructions for use to avoid risks to human health and the environment.

MATTERS TO BE CONSIDERED WHEN USING AND STORING:

  • It is poisonous to bees. Do not apply the flowering time.
  • It is poisonous to fish, avoid contaminating groundwater and surface waters.

STORAGE STATUS

When stored unopened in its original packaging under normal (cool and dry) conditions, there is no change in the physical, chemical and biological properties of the product outside the tolerance limits for 2 years.

COMPANY STATEMENT

The manufacturers guarantee the quality of their products provided that they are sold in their original packaging. Manufacturers do not accept responsibility for any damage caused by incorrect storage of their products or deficiencies in following the recommendations.

LICENSE OWNER AND MANUFACTURER COMPANY

ERTAR KİMYA Agricultural Products Tools Manufacturing Market. Singing. ve Tic. Ltd. Sti.

Acıdere Organize Sanayi Bölgesi Mahallesi Zafer Cad. No: 8 Saricam / ADANA

Tel: 0 (322) 456 19 45 Fax: 0 (322) 456 19 47

info@ertarkimya.com.tr www.ertarkimya.com.tr

PLANT AND HAZARDOUS ORGANISMS FOR USING PLANT PROTECTION

Plant Name Harmful Organism Name Application Dose and Period Time Between Last Application and Harvest
Paddy Frog Spoon (Alisma plantago)
Pigeon's Foot (Ammannia coccinea)
Girl's grass (Cyperus Difformis)
Bottom grass (Linderniapyxidaria)
Three-pointed chair instrument (Scirpusmucronatus)

200 ml/da

When weeds have 3-5 leaves

60 day