TREND 20 EC

Explanation
PREPARATION OF THE PLANT PROTECTION PRODUCT FOR APPLICATION:

The plant protection product calculated over the recommended dosage is first mixed with some water in a separate container. The tank of the application machine is half filled with water. While the mixer of the machine is running, the mixture is added to the tank. The mixing is continued and the tank is completed with water. Mixing process continues until the application is completed. The prepared plant protection product should be used on the same day. The amount of water to be used per decare should be 20-40 liters, and fan jet nozzle should be used in applications.

Calibration:

Before the application, the calibration of the application machine should be done. Mixing amount should be adjusted to provide a good coating in applications. Applications should be done during the cool hours of the day under windless or less windy weather conditions.

CLEANING OF THE APPLICATION MACHINE:

Empty the application machine's tank safely immediately after the application is completed. After filling the tank with clean water, run the mixer and spray system to ensure all parts are washed. Do not wash near water sources. Do not discharge washing water and wastes into water sources.

HOW TO USE THE PLANT PROTECTION PRODUCT:

TREND 20 EC is applied to the drain paste, which is a problem in paddy cultivation areas, against water separation and dam grass with the spreading adhesive supplied in the same package, and then applied to the drained (cheesy) pans. Care should be taken to apply the product evenly across the field and cover the entire ceiling. Care should be taken not to exceed the recommended dose. Following the application, after the product dries on the weed surface, the pans should be filled with a water depth of at least 10 cm within 48 hours at the latest and kept closed for at least 48 hours, so as to keep water at a depth of 10 cm.

Continuous use of plant protection products with the same effective substance causes resistance formation. For this reason, do not use TREND 20 EC twice in a row in the same season. If a second application is required in the same season, plant protection products with different active substances Penoxsulam, Propanil and Bentazon active substances should be used.

RESISTANCE MANAGEMENT:

The plant protection product named TREND 20 EC is a herbicide classified as Group A, 1 according to its mechanism of action. Repetitive applications of plant protection products with the same mechanism of action promote resistance development. For this reason, to delay developing resistance, do not exceed total application number of TREND 20 EC in the same production season. In cases where the application should be repeated, pay attention to the use of plant protection products with a different mechanism of action (Group A, 1 external).

MIXTURE STATUS:

To achieve the best effect, TREND 20 EC should only be mixed with spreading adhesive supplied in the same package. It is not recommended to mix with other plant protection products. If a mixture is needed, premix test should be done.

• Read the label first.
• Do not use it at home.
• Keep away from children, food and animal feeds.
• Do not eat, drink or smoke during the application of the plant protection product.
• Do not let people and animals enter the field for 1 day.
• To prevent risks to human and environmental health, use as recommended and at the recommended dosage.

USE OF THE RECOMMENDED PRODUCTS ARE ABSOLUTELY PROHIBITED.

Rinse well by putting 1/4 of clean water in the empty packages of the product used. Pour the rinse water into the application tank. Repeat this process 3 times.

POISONING SYMPTOMS:

General signs of poisoning may appear. It can cause headaches, dizziness, vomiting, eye irritation.

FIRST AID MEASURES:

After Inhalation; Remove to fresh air, in case of impact, consult a doctor.

After Skin Contact; Immediately take off the contaminated clothing. Wash the body parts of the medicine with plenty of water and soap for 15-20 minutes. If skin irritation persists, call a doctor. Wash contaminated clothing before using it.

After Eye Contact; Immediately flush the eyes and under the eyelids with plenty of water for 15 minutes. Remove contact lenses, if present. Get medical attention immediately.

After Swallowing; If swallowed, seek medical advice with the product label or this information form. Never give anything by mouth to the unconscious patient and do not force them to vomit.

NATIONAL POISON CENTER (UZEM) TEL: 114

ANTIDOTE and TREATMENT:

It has no special antidote. Treatment is applied according to the symptoms.

CONTENTS:

1.Cyhalofop butyl

HAZARDOUS EXPRESSIONS (H):

H226: Flammable liquid and vapor.

H302: Harmful if swallowed.

H312: Harmful in contact with skin.

H315: Causes skin irritation.

H318: Causes serious eye damage.

H332: Harmful if inhaled.

H410: Long-lasting, very toxic effect in the aquatic environment.

H411: Long lasting, toxic effect in the aquatic environment.

Precautionary Statements (P):

P210: Keep away from heat. - No smoking

P280 Wear protective gloves / protective clothing / eye protection / face protection.

P370 + 378: In case of fire: Use water spray, carbon dioxide, foam, dry powder for extinction.

P403 + P233: Store in a well-ventilated area. Keep container tightly closed.

P405: Store locked up.

P501: Dispose of contents / container in accordance with local regulations.

EUH401: Follow the instructions for use to avoid risks to human health and the environment.

MATTERS TO BE CONSIDERED WHEN USING AND STORING:

• It is poisonous to bees. Do not apply the flowering time.
• It is poisonous to fish, avoid contaminating groundwater and surface waters.
• TREND 20 EC PRODUCTS ARE SOLD WITH A SPEED ADHESIVE IN THE ENOUGH QUANTITY TO BE USED ALSO IN APPLICATIONS.
• Do not use empty plant protection product packages for any purpose.

STORAGE STATUS:

When stored unopened in its original packaging under normal (cool and dry) conditions, there is no change in the physical, chemical and biological properties of the product for 2 years outside the tolerance limits.

COMPANY STATEMENT:

The manufacturers guarantee the quality of plant protection products provided that they are sold in their original packaging. Manufacturers do not accept responsibility for any damage caused by improper storage of plant protection products or deficiencies in following recommendations.

LICENSE OWNER MANUFACTURER:

ERTAR KİMYA Agricultural Products Tools Manufacturing Market. Singing. ve Tic. Ltd. Sti.

Acıdere OSB Mah. Zafer Cad. No: 8 Saricam / ADANA

Tel: 0 (322) 456 19 45 Fax: 0 (322) 456 19 47

info@ertarkimya.com.tr www.ertarkimya.com.tr

PLANT AND FOREIGN HERBS TO USE THE PLANT PROTECTION PRODUCT: