PREPARATION OF THE PLANT PROTECTION PRODUCT FOR APPLICATION:
The plant protection product calculated over the recommended dosage is first mixed with some water in a separate container. The tank of the application machine is half filled with water. While the mixer of the machine is running, the mixture is added to the tank. The mixing is continued and the tank is completed with water. Mixing process continues until the application is completed. The prepared plant protection product should be used on the same day. The amount of water to be used per decare should be 20-40 liters, and fan jet nozzle should be used in applications.
Before the application, the calibration of the application machine should be done. Mixing amount should be adjusted to provide a good coating in applications. Applications should be done during the cool hours of the day under windless or less windy weather conditions.
CLEANING OF THE APPLICATION MACHINE:
Empty the application machine's tank safely immediately after the application is completed. After filling the tank with clean water, run the mixer and spray system to ensure all parts are washed. Do not wash near water sources. Do not discharge washing water and wastes into water sources.
HOW TO USE THE PLANT PROTECTION PRODUCT:
Cotton and Sunflower; The best result is achieved by mixing the drug into the soil. The application can be done up to 7 days before planting. The field should be cut-free and properly prepared. After application, mixing to the soil is done with disc plow, rake or rototiller at a depth of 5-8 cm. In case of precipitation within 4 days after application, mixing to the soil is not compulsory. It should be applied before cotton, within 5 days following the cultivation as a single application in cotton.
Potato, Corn, Onion and Seedling Grown Tomatoes; Drug application in these plants is applied to the soil surface before emergence after seed planting or planting. Seed planting depth should be 4-5 cm. It should be applied before the emergence of potatoes and weeds in the potato. When using the drug in Egypt, no mixing is done in the soil and it is not used in sugar corn. Please consult the company before using it in corn planted for seed production. It can be used as a pre-emergence onion, and after weed 2 leaves of onion, weeds can be applied in very small circuits (1-2 leaves). If weeds exceed 1-2 leaves, the effect decreases and the necessary benefit is not provided. Tomato seedlings should be planted between the 2nd and 6th days after spraying. Care should be taken not to touch the roots of the seedlings during the planting of the seedlings. 5-10 mm within 3-7 days following application in dry conditions. Irrigation should be done.
Up to 6 months after application with RECLAME 330 EC, no other plants can be alternated. Cotton, beans, peas, corn, soybeans, peanuts, sunflowers and surprising plants. When the field is broken for any reason, the soil can be processed at a depth of at least 15 cm, and potatoes, beans, summer cereals, corn, cotton, soybeans, peas can be planted. Corn, beans and peas can be planted without soil tillage provided that they are at least 5 cm deep.
INFORMATION ABOUT RESISTANCE:
The plant protection product named RECLAME 330 EC is a herbicide classified as Group K1,3 according to its mechanism of action. Repeated applications of plant protection products with the same mechanism of action promote resistance development. Therefore, to delay the development of resistance RECLAME 330 EC 's Do not exceed the recommended total number of applications in the same season. In cases where the application should be repeated, pay attention to the use of plant protection products with a different mechanism of action (other than Group K1,3).
It is not recommended to mix with other plant protection products. If a mixture is needed, a pre-mix test is recommended.
Rinse well by putting clean water up to ¼ in the empty packages of the product used. Pour the rinse water into the spraying tank. Repeat this process 3 times.
Irritation in the eyes and skin, blood attack, fever.
FIRST AID MEASURES:
After inhalation: Calm the patient, remove to fresh air, seek medical attention.
After Skin Contact: Immediately take off any contaminated clothing. Wash the body parts that touch the medicine with plenty of water for 15-20 minutes. If skin irritation persists, call a doctor. Wash contaminated clothing before using it.
After Eye Contact: Immediately wash the eyes and under the eyelids with plenty of water for 15 minutes. Remove contact lenses, if present. Get medical attention immediately.
After Swallowing Contact: If swallowed, seek medical advice with the product label or this information sheet. Never give anything by mouth to the unconscious patient and do not force them to vomit.
NATIONAL POISON CENTER (UZEM) TEL: 114
ANTIDOTE and TREATMENT:
It has no special antidote. Treatment is applied according to the symptoms. If swallowed, drink plenty of milk, egg whites or water if they are not. Avoid alcohol. Call a doctor for medical attention.
HAZARDOUS EXPRESSIONS (H)
H226: Flammable liquid and vapor.
H312: Harmful in contact with skin.
H315: Causes skin irritation.
H317: Causes allergic skin reactions.
H318: Causes serious eye damage.
H332: Harmful if inhaled.
H400: Very toxic in the aquatic environment.
H410: Long-lasting, very toxic effect in the aquatic environment.
Precautionary Statements (P)
P210: Keep away from heat. - No smoking
P273: Avoid release to the environment.
P280: Wear protective gloves / protective clothing / eye protection / face protection.
P370 + P378: In case of fire: Use water spray, carbon dioxide, foam, dry powder for extinction
P501: Dispose of contents / container to National Environmental Legislation.
EUH208: Contains Pendimethalin. May cause an allergic reaction.
EUH401: Follow the instructions for use to avoid risks to human health and the environment.
MATTERS TO BE CONSIDERED WHEN USING AND STORING:
When stored unopened in its original packaging under normal (cool and dry) conditions, there is no change in the physical, chemical and biological properties of the product for 2 years outside the tolerance limits.
The manufacturers guarantee the quality of their products provided that they are sold in their original packaging. The manufacturers do not accept responsibility for any damage caused by incorrect storage of their products or deficiencies in following the recommendations.
AUTHORIZATION HOLDER and MANUFACTURER:
ERTAR KİMYA Agricultural Products Tools Manufacturing Market. Singing. ve Tic. Ltd. Sti.
Acıdere OSB Mahallesi Zafer Cad. No: 8 Saricam / ADANA
Tel: 0 (322) 456 19 45 Fax: 0 (322) 456 19 47
PLANTS AND FOREIGN HERBS WHICH ARE USED:
|Narrow Leaf Weeds
Foxtail (Alopecurus myosuroides)
Wind Grass (Apera spica-venti)
Darıcan (Echinochloa crus-galli)
Blackgrass (Digitaria sanguinalis)
Meadow Bunch (Poa pratensi)
Millet (Panicum miliaceum)
Broad Leaved Weeds
Black Bicep (Atriplex patula)
Shepherd's Bag (Capsella bursa-pastoris)
Goose Foot-Sirken (Chenopodium album)
Bamboo Grass (Chrozophora tinctoria)
Euphorbia (Euphorbia heterophylla)
Sticky Grass (Galium aparine)
Brown Grass (Heliotropium europaeum)
Honey dad (Lamium purpureum)
Shepherd's Wand (Polygonum spp.)
Purslane (Portulaca oleracea)
Dog Grape (Solanum nigrum)
Bird Grass (Stellaria media)
Nightingale Grass (Sisymbrium officinale)
Field Maple Flower (Thlaspi arvense)
Stinging Nettle (Urtica urens)
Chamomile (Matricaria spp.)
Poppy (Papaver rhoaes)