The plant protection product calculated over the recommended dosage is first mixed with some water in a separate container. The tank of the application machine is half filled with water. While the mixer of the machine is running, mixed water is added to the tank. The mixing is continued and the tank is completed with water. Mixing process continues until application is completed. Use the prepared plant protection product on the same day.


Before the application, the calibration of the application machine should be done. The amount of mixture to be given to the specific area should be well adjusted in order to provide a good coating in the application. Applications should be done during the cool hours of the day in windless or less windy weather conditions.


Empty the sprayer tank safely immediately after the application is completed. After filling the tank with clean water, run the mixer and spray system to wash all parts of it. Do not wash near water sources. Do not discharge washing water and wastes into water sources.


Ring stain in olives:

In the Marmara region: 1. Application: Just before the autumn shoots are seen

Application: After the flower pots become clear, before the flowers bloom,
In the Aegean region: 1. Application: Just before the spring shoots are seen,

Application: After the flower pots become clear, before the flowers bloom
In the Mediterranean region: 1. Application: After harvest

Application: just before the spring shoots are seen
3. Application: After the flower pots become clear, they should be done before the flowers bloom.

Vineyard mildew:

1. Application: Should be applied when the length of the shoot is 25-30 cm.

and other applications: It should be done 15 days after the first application. Taking into consideration the meteorological factors such as the daily temperature and precipitation averages, relative humidity and dew of the region, applications should be made when the conditions for the disease infection occur, and the applications should be terminated when the conditions disappear.
Tomato early leaf blight:

Application should be started as soon as the first spots appear on both seedlings and field. When the climatic conditions are suitable for the development of the disease, the application continues with an interval of 10 days depending on the course of the disease and the climatic conditions.

Tomato mildew;

Application starts with the appearance of a white ash-like covering on the lower surface of 3-5 mm brown spots on tomato leaves.

Leaf piercing in stone fruits: (Freckle) (Apricot)

immediately after application fall foliage,
The application is done in spring before the flower buds open.
In addition to the apricots, the third application should be made while the leaf and male organ plate are stripped on the ends of the fruit.

Potato mildew:

Application is started when climatic conditions such as high humidity occur for the disease outlet or when the first symptoms of the disease are seen in the environment and the application is repeated at 10-day intervals depending on the severity of the disease.

Peach leaf curl:

An application is made when the buds begin to swell.


The plant protection product named ABOVE 35 DF is a fungicide classified as Group M: 1 according to its mechanism of action. Repeated applications of plant protection products with the same mechanism of action promote resistance development. For this reason, to delay the development of resistance, do not exceed the total number of applications recommended in the same season of ABOVE 35 DF. In cases where the application should be repeated, pay attention to the use of plant protection products with a different mechanism of action (except group M: 1).

With ABOVE 35 DF, do not apply more than 2 in olives, 3 in apricots, 3 in tomatoes, 3 in potatoes, 2 in peaches and 3 in vineyards.


ABOVE 35 DF Fosetyl-Al should not be mixed with a fungicide with an effective substance without adjusting the pH of the medium. Otherwise phytotoxicity may occur. Before mixing with other plant protection products, a pre-mix test with “jar test” should be applied. Information on the miscibility in the labels of the products should be read carefully. For more information, contact the product's license holders or the vendor.

  • Read the label first.
  • Do not use at home
  • Keep away from children, food and animal feeds.
  • Do not eat, drink or smoke during the application of the plant protection product.
  • Do not let people and animals enter the field for 1 day.
  • To prevent risks to human and environmental health, use as recommended and at the recommended dosage.
  • It is strictly forbidden to use other than the recommended products.


May cause irritation in contact with skin and eyes. If swallowed, yellow spots, vomiting, diarrhea and abdominal pain may be seen on the skin. If inhaled, liver disorders, kidney disorders, central nervous system depression may be seen.


In case of inhalation; Take the patient to the open air. If breathing is irregular or stopped, administer artificial respiration. Keep the patient in a warm and comfortable place. Call a doctor or poison information center immediately.

In case of skin contact; Immediately take off the contaminated clothing. Wash the body parts of the medicine with plenty of water and soap for 15-20 minutes. If skin irritation persists, call a doctor. Wash contaminated clothing before using it.

In Eye Contact; Immediately flush eyes and under eyelids with plenty of water for 15 minutes. Remove contact lenses, if present. Get medical attention immediately.

If Swallowed; If swallowed, seek medical advice with the product label or this information form. Never give anything by mouth to an unconscious patient and do not force them to induce vomiting.


It has no special antidote. The stomach is washed with activated charcoal. Plasma and Navadrol are given to aid blood circulation.


Copper Hydroxide

H302: Harmful if swallowed.

H315: Causes skin irritation.

H318: Causes serious eye damage.

H319: Causes serious eye irritation.

H330: Fatal if inhaled.

H332: Harmful if inhaled.

H335: May cause respiratory irritation.

H400: Very toxic in the aquatic environment.

H411: Long lasting, toxic effect in the aquatic environment.

Precautionary Statements (P)

P261: Avoid breathing spray.

P273: Avoid release to the environment.

P280: Wear protective gloves / protective clothing / eye protection / face protection.

P362: Take off contaminated clothing and wash it before reuse.

P405: Store locked up.

P501: Dispose of contents / container in accordance with local regulations.

EUH401: Instructions for use to prevent risks to human health and the environment


  • It is poisonous to fish and aquatic organisms. Do not contaminate the waters.
  • It is poisonous to bees. Do not use during the flowering period.
  • Store the product in its original packaging, in a cool and dry place, separately from foodstuffs and feed.
  • Do not contaminate empty packaging, waste water and unused product into lakes, drinking water or sewage systems.
  • Do not use empty plant protection product packaging for any other purpose.


When stored unopened in its original packaging under normal (cool and dry) conditions, there is no change in the physical, chemical and biological properties of the product for 2 years outside the tolerance limits.


The manufacturers guarantee the quality of their products provided that they are sold in their original packaging. Manufacturers do not accept responsibility for any damage caused by incorrect storage of their products or deficiencies in following the recommendations.


ERTAR KİMYA Agricultural Products Tools Manufacturing Market. Singing. ve Tic. Ltd. Sti.

Acıdere Osb Mah. Zafer Cad. No: 8 Saricam / ADANA

Tel: 0 (322) 456 19 45 Fax: 0 (322) 456 19 47

info@ertarkimya.com.tr www.ertarkimya.com.tr


Plant Name Harmful Organism Name Administration dose Time Between Last Application and Harvest
Olive Ring stain

(Spilocaea oleaginea)

175 g/100 L water 14 day
vineyard* Downy mildew

(Plasmopara viticola) 45

175 g/100 L water 14 day
Tomato Early blight

(Alternaria solani)

200 g/100 L water 14 day

Downy mildew

(Phytophthora infestans)

150 g/da 14 day
Apricot Leaf-piercing in stone fruits (Wilsonomyces carpophylus) 1. Application: 400 g / 100 L water

2. Application: 200 g / 100 L water

3. Application: 200 g / 100 L water

14 day
Potato Downy mildew

(Phytophthora infestans)

200 g/da 14 day
Peach Leaf curl

(Taphrina deformans)

300 g/100 L water —-

(*) It is not used in vineyards where harvesting vine leaves will be harvested.