PREPARATION OF THE PLANT PROTECTION PRODUCT FOR APPLICATION:
The plant protection product calculated over the recommended dosage is first mixed with some water in a separate container. The tank of the application machine is half filled with water. While the mixer of the machine is running, the mixture is added to the tank. The mixing is continued and the tank is completed with water. Mixing process continues until the application is completed. Use the prepared plant protection product on the same day.
Before the application, the application machine should be calibrated. The amount of mixture to be given to a certain area should be well adjusted in order to provide a good coating. Applications should be done in cool hours of the day in windless or less windy weather conditions.
CLEANING OF THE SPRAYING MACHINE:
Empty the sprayer tank safely immediately after the application is completed. After filling the tank with clean water, run the mixer and spray system to ensure all parts are washed. Do not wash near water sources. Do not discharge washing water and wastes into water sources.
USAGE OF PLANT PROTECTION PRODUCT:
Bean Root Rot
Seed application may be recommended as a preservative before planting. After the seed to be sprayed is slightly moistened, plant protection product should be added and mixed in such a way that the product adheres well to the seed. During mixing, it is necessary to turn the drum slowly to avoid peeling the seed coat.
Application: when the flower is blindfolded (3-5 days before where there is a branch heat)
Application: in the white badge period
Application: When the flower petals fall 70-80%
and other applications should be done at 10-day intervals when the climatic conditions are suitable for the progression of the disease.
Application: When the flower is blindfolded (3-5 days before where there is a branch heat)
Application: During the pink rosette bud (when the flowers are seen separately)
Application: When the flower petals fall 70-80%
and other applications should be done every 15 days when the climatic conditions are suitable for the progression of the disease.
Pocket Disease in Plums
Application: When the buds swell
Application: It should be done in the period when the flower petals fall 80%.
The hazelnuts are started to be applied as soon as the milk is damaged.
Field Bunny, Island Bunny
The parts of the rabbits and rodents gnawed up to 1 m height from the soil level are sprayed. Application can be done with a sprayer or brush. On the evening of the application, frost should not occur and the trees should not be wet during the application.
Anthracnose (Melon, Watermelon) in Cucurbitaceae
Seed application: Before planting, seeds should be soaked for 1 hour and dried after 1 hour.
Green component application: Although the daily average temperature should be 16 C and proportional humidity should reach 80%, the most practical way in application should be started with the detection of the first anthracnose spots on the stems and leaves of melon-watermelon plants in the environment. The application of the disease should continue depending on the climatic conditions.
Green component spraying: The application should be started when the daily average temperature is 10 C and the proportional humidity is at least 80%. The application of the disease is continued at 7-10 day intervals, taking into account the climatic conditions. If there is heavy rainfall on the day of application, the application should be repeated.
Seed application: 3-4 hours before sowing, chickpea seeds should be soaked in water for one hour, then spread over an exhibition for half an hour and then aired and mixed with the required amount of plant protection product.
Seed medicines are mixed and planted in a closed container after the seeds are slightly moistened.
Leaf-piercing in Peach Fruit (Peach)
Application 1: Immediately after leaf fall in autumn
2.Application: In spring, when flower buds swell, before the flowers bloom.
Flower Monilya in Stone Fruit (Apricot, Cherry, Peach)
1st application: At the beginning of flowering (5-10% in flowers)
2.application: It is done in full bloom (90-100% flowers).
INFORMATION ABOUT RESISTANCE
Plant protection product named MASSTHIRAM is a fungicide classified as Group M: 3 according to its mechanism of action. Repetitive applications of plant protection products with the same mechanism of action promote resistance development. For this reason, in order to delay the development of resistance, do not exceed the total number of applications recommended by MASSTHIRAM in the same season. In cases where the application should be repeated, pay attention to the use of plant protection products with a different mechanism of action (except Group M: 3).
It can be mixed with plant protection products containing benomyl, carboxin, triadimenol. Cannot be mixed with copper fungicides. If copper medicines are applied to plants, Thiram drug-containing drugs should not be administered immediately. If the copper drug is applied, a period of 2 weeks should be expected.
MATTERS TO BE CONSIDERED WHEN USING AND STORING
When stored unopened in its original packaging under normal (cool and dry) conditions, there is no change in the physical, chemical and biological properties of the product outside the tolerance limits for 2 years.
The manufacturers guarantee the quality of plant protection products provided that they are sold in their original packaging. The manufacturers do not accept responsibility for damage caused by improper storage of plant protection products or deficiencies in following recommendations.
LICENSE OWNER AND MANUFACTURER COMPANY
ERTAR KİMYA Agricultural Products Tools Manufacturing Market. Singing. ve Tic. Ltd. Sti.
Acıdere OSB Mah. Sanayi Zafer Cad. No: 8 Saricam / ADANA
Tel: 0 (322) 4561945 Fax: 0 (322) 4561947
PLANT AND HAZARDOUS ORGANISMS TO BE USED
|Plant Name||Harmful Organism Name||Administration dose||
Between the Last Application and Harvest
|Beans||Kök çürüklüğü (Fusarium spp., Rhizoctonia solani, Macrophomina phaseoli)||300 g/100 L water||14 day|
|Pear||Karaleke (Venturia pirina)||150 g/100 L water||14 day|
|150 g/100 L water||14 day|
|300 g/100 L water||14 day|
|Hazelnut||Seven sleeps (Glis glis)
|4 kg/100 L water||14 day|
|Field Bunny (Lepus europaeus)
Island rabbit (Oryctolagus cuniculus)
|150 g/1 L water||—|
|Anthracnose in Cucurbitaceae
|300 g/100 kg seed||—|
|Apricot||Flower monilya in stone fruits (Monilinia laxa)||200 g/100 L water||14 day|
|Cherry||Flower monilya in stone fruits (Monilinia laxa)||150 g/100 L water||14 day|
|Chickpea||Anthracnose (Ascochyta rabiei)||300 g/100 kg
|200 g/100 L water
(green parts application)
|Onion||Riding (Urocystis cepulae)||5 kg / 100 kg shallots||—|
|Peach||Leaf-piercing in stone fruits
|300 g/100 L water
|Flower monilya in stone fruits (Monilinia laxa)|