PREPARATION OF PLANT PROTECTION PRODUCT FOR APPLICATION:
The plant protection product calculated over the recommended dosage is first mixed with some water in a separate container. The tank of the application machine is half filled with water. Medicated water is added to the tank while the mixer of the machine is running. The mixing is continued and the tank is completed with water. Mixing process continues until the application is completed. Use the prepared plant protection product on the same day.
Before the application, the calibration of the application machine should be done. The amount of mixture to be given to a certain area should be well adjusted in order to provide a good coating. Applications should be done in cool hours of the day in windless or less windy weather conditions.
CLEANING OF APPLICATION TOOLS:
Empty the application machine's tank safely immediately after the application is completed. After filling the tank with clean water, run the mixer and spray system to ensure all parts are washed. Do not wash near water sources. Do not discharge washing water and wastes into water sources.
USAGE OF PLANT PROTECTION PRODUCT:
Bond Mildew (Plasmopara viticola);
The first application should be started when the shoots reach 25-30 cm. Second and subsequent sprayings
1. the duration of the drug and the state of development of the disease, taking into account the meteorological factors
Spraying is done with an interval of 10-15 days.
Tomato Early Leaf Blight (Alternaria solani);
Spraying should be started as soon as the first spots appear on both seedlings and field.
Depending on the duration of the drug, when climatic conditions are suitable for disease development
spraying should be repeated.
Apple Black Spot (Venturia inaequalis);
1st spraying: When the flower eyes are blistering (3-5 days before in the branches with branch order)
2nd spraying: During the pink rosette bud (when the flowers are seen separately)
3rd spraying: When 70-80% of flower petals are shed
4. And other sprayings, on the other hand, that climate conditions are suitable for the progression of the disease
It should be applied taking into account the duration of the drugs used in cases.
INFORMATION ABOUT RESISTANCE:
Plant protection product named ERTARCOZEB BLUE as Group M3 according to its mechanism of action
is a classified fungicide. Plant protection products with the same mechanism of action
repetitive practices promote resistance development. Therefore, resistance
ERTARCOZEB BLUE recommended in the same production season to delay its development
Do not exceed the total number of applications. When the application needs to be repeated
The use of plant protection products with different mechanisms (except Group M3)
It can be used by mixing with other insecticides, fungicides and foliar fertilizers except those with alkaline properties.
Nausea, vomiting, weakness, skin and mucous irritation, tremors appear.
ANTIDOTE and TREATMENT
It has no special antidote. Treatment is applied according to the symptoms.
FIRST AID MEASURES:
AFTER INHALATION: Remove to fresh air; If effects appear, consult a doctor.
AFTER SKIN CONTACT: Wash with soap and plenty of water and remove the material that gets on your skin immediately. Take off clothing and shoes while washing. If irritation persists, call a doctor. Wash clothes before reuse.
AFTER EYE CONTACT: Rinse immediately with water; remove contact lenses after the first 5 minutes, then continue washing eyes for at least 15 minutes. Preferably seek medical attention from an ophthalmologist without delay.
AFTER SWALLOWING: Call a poison control center or doctor immediately for treatment advice. If the person can swallow, sip a glass of water. Do not induce vomiting unless recommended by the doctor. Never give anything by mouth to an unconscious person.
HAZARDOUS EXPRESSIONS (H)
H317: Causes allergic skin reactions.
H361d: Suspected of causing damage to the unborn child.
H400: Very toxic in the aquatic environment.
Precautionary Statements (P)
P201: Read special instructions before use.
P202: Do not handle until all precautionary statements are read and understood.
P280: Wear protective gloves / protective clothing / eye protection / face protection.
P501: Dispose of contents / container in accordance with local regulations.
EUH401: Follow the instructions for use to avoid risks to human health and the environment.
MATTERS TO BE CONSIDERED WHEN USING AND STORING
When stored unopened in its original packaging under normal (cool and dry) conditions, there is no change in the physical, chemical and biological properties of the drug for 2 years outside the tolerance limits.
The manufacturers guarantee the quality of their medicines provided that they are sold in their original packaging. Manufacturers do not accept responsibility for any damage caused by improper storage of medicines or deficiencies in following recommendations.
LICENSE OWNER AND MANUFACTURER COMPANY
ERTAR KİMYA Agricultural Products Tools Manufacturing Market. Singing. ve Tic. Ltd. Sti.
Haci Sabanci Organize Sanayi Zafer Cad. No: 8 Saricam / ADANA
Tel: 0 (322) 456 19 45 Fax: 0 (322) 456 19 47
PLANTS AND DISEASES THAT IT IS USED FOR
|Plant Name||Harmful Organism Name||Administration dose||Time Between Last Application and Harvest|
|Apple||Black stain(Venturia İnaequalis)||250 g/100 L water||14 day|
|200 g/100 L water||21 day|
|Tomato||Early blight(Alternaria solani)||250 g/100 L water||14 day|
(*) It is not used in vineyards where harvesting vine leaves will be harvested.