COLONY 60 FS

Explanation
PREPARATION OF PLANT PROTECTION PRODUCT FOR APPLICATION:

Seed application can be done with a rotary application canister or a seed application machine working on the spray principle. In the absence of suitable equipment, the seeds are spread on a flat surface and applied in a way to provide a homogeneous coating. Since the seeded seed can change the seeder setting made before, it is recommended to make the seeder adjustment with the seeded seed before planting. After use, the application tool should be thoroughly cleaned.

USAGE OF PLANT PROTECTION PRODUCT:

If the application barrel (cascade) is to be applied, the 50 ml product recommended for 100 kg of seeds is mixed with the water in a container and then added slowly to the application barrel several times. coating is provided.

On the other hand, the selectors with application equipment contain the amount of water that will ensure the ideal coating of the seed by conducting a preliminary trial. The ideal amount of water is the amount of water that covers the seed but does not flow. After this point is achieved, the required amount is mixed thoroughly with water and the application device is placed in the tank and applied. Do not use seeds with low germination capacity, peeled or cracked, not suitable for planting. Seed application equipment may cause problems at temperatures below very cold (0 ° C). (COLONY 60 FS) should be applied at temperatures above 0 ° C.

INFORMATION ABOUT RESISTANCE

The plant protection product named COLONY 60 FS is a fungicide classified as G1: 3 according to its mechanism of action. Repetitive applications of plant protection products with the same mechanism of action promote resistance development. For this reason, to delay developing resistance, do not exceed total application number of COLONY 60 FS in the same season. In cases where the application should be repeated, pay attention to the use of plant protection products with different mechanism of action (except G1: 3).

MIXTURE STATUS

It can be mixed with 70% and 600 g / l plant protection products of imidacloprid. It does not need to be mixed with another drug for the control of disease with seed.

• Read the label first.
• Do not use at home
• Keep away from children, food and animal feeds.
• Do not eat, drink or smoke during the application of the plant protection product.
• Do not let people and animals enter the field for 1 day.
• To prevent risks to human and environmental health, use as recommended and at the recommended dosage.
• It is strictly forbidden to use other than the recommended products.
• Rinse well by putting clean water up to ¼ in the empty packages of the product used. Pour the rinse water into the application tank. Repeat this process 3 times.

POISONING SYMPTOMS

General signs of poisoning may appear.

FIRST AID MEASURES

In case of inhalation; Move to fresh air. If symptoms persist, consult a doctor.

In case of skin contact; Take off contaminated clothing immediately. Wash immediately with soap and plenty of water. If symptoms persist, consult a doctor. Wash contaminated clothing before reuse.

In Eye Contact; Rinse immediately with plenty of water for at least 15 minutes, including under the eyelids. Get medical attention.

If Swallowed; Do not induce vomiting. Rinse your mouth. If the person is conscious, drink water.

ANTIDOTE and TREATMENT

It has no special antidote. Treatment is applied according to the symptoms.

CONTENTS

tebuconazole
HAZARDOUS EXPRESSIONS (H)

H302: Harmful if swallowed.

H318: Causes serious eye damage.

H361: Suspected of causing damage or reproductive damage to the unborn child.

H372: Causes damage to organs through prolonged or repeated exposure.

H411: Long lasting, toxic effect in the aquatic environment.

Precautionary Statements (P)

P202: Do not handle until all precautionary statements are read and understood.

P273: Avoid release to the environment.

P280: Wear protective gloves / protective clothing / eye protection / face protection.

P391: Collect spillages.

P405: Store locked up.

P501: Dispose of contents / container in accordance with local regulations.

EUH401: Follow the instructions for use to avoid risks to human health and the environment.

MATTERS TO BE CONSIDERED WHEN USING AND STORING

• It is poisonous to bees. Do not use during the flowering period.
• It is poisonous to the fish. Avoid contaminating groundwater and groundwater.
• Do not use seeds with plant protection products as food and animal feed.
• Keep the plant protection product packaging closed.
• Do not use empty packaging for any other purpose.

STORAGE STATUS

When stored under normal (cool and dry) conditions, there is no change in the physical, chemical and biological properties of the product for 2 years outside the tolerance limits.

COMPANY STATEMENT

The manufacturers guarantee the quality of their products provided that they are sold in their original packaging. Manufacturers do not accept responsibility for any damage caused by incorrect storage of their products or deficiencies in following the recommendations.

LICENSE OWNER AND MANUFACTURER COMPANY

ERTAR KİMYA Agricultural Products Tools Manufacturing Market. Singing. ve Tic. Ltd. Sti.

Acıdere OSB Mah. Sanayi Zafer Cad. No: 8 Saricam / ADANA

Tel: 0 (322) 456 19 44 Fax: 0 (322) 456 19 47

info@ertarkimya.com.tr www.ertarkimya.com.tr

PLANT AND HAZARDOUS ORGANISMS TO BE USED