DANUA 50 WG

Explanation
PREPARATION OF PLANT PROTECTION PRODUCT FOR APPLICATION

The plant protection product calculated over the recommended dosage is first mixed with some water in a separate container. The application machine tank is half filled with water. While the mixer of the machine is running, the mixture is added to the tank. The mixing is continued and the tank is completed with water. Mixing process continues until the application is completed. Use the prepared plant protection product on the same day.

Calibration

Before the application, the calibration of the application machine should be done.
Mixing amount should be adjusted to provide a good coating in applications. Applications should be done in cool hours of the day in windless or less windy weather conditions.

CLEANING OF THE SPRAYING MACHINE

Empty the sprayer tank safely immediately after the application is completed. After filling the tank with clean water, run the mixer and spray system to ensure that all parts are washed. Do not wash near water sources. Do not discharge washing water and wastes into water sources.

HOW TO USE THE PLANT PROTECTION PRODUCT:

Apple crumble:

Application: When the flower is blindfolded (3-5 days before where there is a branch heat)
Application: During the pink rosette bud period (when the flowers are seen separately)
Application: When the flower petals fall 70-80%
and other applications: Where the climatic conditions are suitable for the progression of the disease, it should be done at intervals of 12-14 days.
Pear crumble

Application: When the flower is blindfolded (3-5 days before where there is a branch heat)
Application: During the white badge period
Application: When the flower petals fall 70-80%
and other applications: Where the climatic conditions are suitable for the progression of the disease, it should be done at intervals of 12-14 days.
Flower monilya in apricot stone fruits:

Application: at the beginning of flowering (in 5-10% flowers)
Application: It is done in full bloom (90-100%).

PLANT PROCESS:

When used as recommended, it does not have any adverse effects on recommended crops. In case of hesitation, sensitive and new plant tolerance should be checked.

INFORMATION ABOUT RESISTANCE

The plant protection product named DANUA 50 WG is a fungicide classified as Group D1: 9 according to its mechanism of action. Repetitive applications of plant protection products with the same mechanism of action promote resistance development. For this reason, in order to delay the development of resistance, do not exceed the total number of applications recommended in the same season of DANUA 50 WG. In cases where the application should be repeated, pay attention to the use of plant protection products with a different mechanism of action (except Group D1: 9).

MIXTURE STATUS

DANUA 50 WG can be used in admixture with other fungicides generally used in soft stone and stone fruit trees. If in doubt, a small miscibility test should be carried out before application. If DANUA 50 WG will be used as a warehouse mixture with other plant protection products, put the products into the water in the following order. First DANUA 50 WG, and then other plant protection products are added to the mixture. If there are plant protection products to be used as a mixture, there are those in eri water-soluble packaging, these are placed first and then DANUA 50 WG.

• Read the label first.
• Do not use at home
• Keep away from children, food and animal feeds.
• Do not eat, drink or smoke during the application of the plant protection product.
• Do not let people and animals enter the field for 1 day.
• To prevent risks to human and environmental health, use as recommended and at the recommended dosage.
• It is strictly forbidden to use other than the recommended products.

POISONING SYMPTOMS

General signs of poisoning may appear.

FIRST AID MEASURES

In case of inhalation; Move the patient to fresh air. If not necessary, give artificial respiration.

In case of Skin Contact; See: Precautionary Statements (P302 + P352)

In Eye Contact; See: Precautionary Statements (P305 + P351 + P338)

If Swallowed; Give the patient water to drink. Do not induce vomiting. Never give anything by mouth to an unconscious person. Call a doctor or call the poison help center, follow their advice.

ANTIDOTE and TREATMENT

It has no special antidote. Treatment is applied according to the symptoms.

CONTENTS

cyprodinil

HAZARDOUS EXPRESSIONS (H)

H302: Harmful if swallowed.

H312: Harmful in contact with skin.

H315: Causes skin irritation.

H317: Causes allergic skin reactions.

H319: Causes serious eye irritation.

H400: Very toxic in the aquatic environment.

H410: Long-lasting, very toxic effect in the aquatic environment.

Precautionary Statements (P)

P261: Avoid breathing spray.

P273: Avoid release to the environment.

P280 Wear protective gloves / protective clothing / eye protection / face protection.

P302 + P352: IF ON SKIN: Wash with plenty of soap and water.

P305 + P351 + P338: IF IN EYES: Rinse carefully with water for several minutes. Remove contact lenses if fitted and easy to do. Continue rinsing.

P391: Collect spillages.

P501: Dispose of contents / container in accordance with local regulations.

EUH401: Follow the instructions for use to avoid risks to human health and the environment.

MATTERS TO BE CONSIDERED WHEN USING AND STORING

• It is poisonous to bees. Do not use during the flowering period.
• It is poisonous to the fish. Avoid contaminating groundwater and groundwater.
• Keep the plant protection product packaging closed.
• Do not use empty packaging for any other purpose.
• Do not pollute any water sources during the disposal of plant protection product wastes.
• Animal should not be grazed in the newly applied field, food and feed should not be taken from these places, and all pets should be kept away. Food and feed ingredients should not be contaminated with medicine.
• Clean the area contaminated with the drug with carbonated or soapy water.
• The plant protection product spill is cleaned with plenty of water.
• It is not flammable.

STORAGE STATUS

When stored under normal (cool and dry) conditions, there is no change in the physical, chemical and biological properties of the product for 2 years outside the tolerance limits.

COMPANY STATEMENT

The manufacturers guarantee the quality of their products provided that they are sold in their original packaging. Manufacturers do not accept responsibility for any damage caused by incorrect storage of their products or deficiencies in following the recommendations.

LICENSE OWNER AND MANUFACTURER COMPANY

ERTAR KİMYA Agricultural Products Tools Manufacturing Market. Singing. ve Tic. Ltd. Sti.

Acıdere Osb Mah. Zafer Cad. No: 8 Saricam / ADANA

Tel: 0 (322) 456 19 45 Fax: 0 (322) 456 19 47

info@ertarkimya.com.tr www.ertarkimya.com.tr

PLANT AND HAZARDOUS ORGANISMS TO BE USED