PREPARATION OF PLANT PROTECTION PRODUCT FOR APPLICATION:
The plant protection product calculated over the recommended dosage is first mixed with some water in a separate container. The tank of the application machine is half filled with water. While the mixer of the machine is running, the mixture is added to the tank. The mixing is continued and the tank is completed with water. Mixing process continues until the application is completed. Use the prepared plant protection product on the same day.
Before the application, the calibration of the application machine should be done. The amount of mixture to be given to a certain area should be well adjusted in order to provide a good coating. Applications should be done in cool hours of the day in windless or less windy weather conditions.
CLEANING OF THE SPRAYING MACHINE:
Empty the sprayer tank safely immediately after the application is completed. After filling the tank with clean water, run the mixer and spray system to ensure all parts are washed. Do not wash near water sources. Do not discharge washing water and wastes into water sources.
USAGE OF PLANT PROTECTION PRODUCT:
Tomato early leaf blight: Application should be started as soon as the first spots appear on both seedlings and field. When the climatic conditions are suitable for the development of the disease, the application continues with an interval of 10 days depending on the course of the disease and the climatic conditions.
Tomato leaf mold: Application is started when the first spots are seen on the leaves. The application is continued taking into account the severity of the disease, climatic conditions and the duration of the crop protection product.
Vineyard ash: 1st application: In the period when the shoots are 25-30 cm before the flower.
Application: In the period when there are flower buds before flowering.
Application 3: In the period when the flower petals are falling and the small ridges of the groves are large.
4. and other applications: According to the duration of action of the plant protection product used after the third application, the grains are made until I fall.
Citrus brown stain: Applications are started when the shoots begin to develop, taking into account the development of shoots and climate characteristics, when the shoots are about 5-10 cm long and the first signs of disease are seen.
Applications are continued at 15-20 day intervals, especially in order to protect the newly formed parts of the growing shoots and leaves and young fruit from the disease during the development of the shoot.
The applications are terminated when the development of the shoot stops, the precipitation decreases and the temperatures increase and the fruit reaches a diameter of about 4 cm.
Wheat yellow rust:
When symptoms of disease are seen, applications should be started. Green parts are applied against rust factors. Application should be done so that the surface of the leaves and stem is covered with the mixture. Applications are continued at 10-14 day intervals, if necessary, taking into account the climatic conditions and the condition of the disease.
Cereal powdery mildew in wheat:
The course of the disease should be monitored by considering the climatic conditions, and in cases where the disease progresses towards the upper part of the plant, the application of green parts should be started in order to prevent the upper leaves, especially the flag leaf, from becoming infected with the disease.
INFORMATION ABOUT RESISTANCE:
The plant protection product named COLONY 250 EC is a fungicide classified as Group G1: 3 according to its mechanism of action. Repetitive applications of plant protection products with the same mechanism of action promote resistance development. For this reason, to delay developing resistance, do not exceed total application number of COLONY 250 EC in the same production season. In cases where the application should be repeated, pay attention to the use of plant protection products with a different mechanism of action (other than Group G1: 3).
It can be mixed with other formulations except for highly alkaline and acidic plant protection product formulations. If necessary; If it is to be used as a mixture, pre-mixture test should be done before wide applications.
USE OF THE RECOMMENDED PRODUCTS ARE ABSOLUTELY PROHIBITED.
Rinse well by pouring clean water until the empty packaging of the plant protection product used. Pour the rinse water into the application tank. Repeat this process 3 times.
Difficulty in breathing and moving, cramps are typical symptoms.
FIRST AID MEASURES:
After Inhalation: Call a doctor or poison control center immediately. Remove to fresh air. Keep the patient warm and at rest.
After Skin Contact: Wash thoroughly with soap and water. If possible, rinse with Polyethyleneglycol 400 and then rinse with water. Seek medical attention if irritation occurs and persists.
After Eye Contact: Immediately wash eyes with plenty of water for at least 15 minutes. If there are contact lenses, remove them after the first 5 minutes and then continue washing the eyes. Get medical attention if irritation occurs and persists.
After Swallowing: Do not induce vomiting. Call a doctor or poison control center immediately. Rinse your mouth
ANTIDOTE AND TREATMENT:
It has no special antidote. Treatment is applied according to the symptoms.
Tebuconazole, Alkamuls vo / 2003, Xylene
HAZARDOUS EXPRESSIONS (H):
H226: Flammable liquid and vapor.
H302: Harmful if swallowed.
H312: Harmful in contact with skin.
H315: Causes skin irritation.
H317: Causes allergic skin reactions.
H319: Causes serious eye irritation.
H332: Harmful if inhaled.
H361: Suspected of causing damage or reproductive damage to the unborn child.
H411: Long lasting, toxic effect in the aquatic environment.
EUH208: Includes Alkamuls vo / 2003. May cause an allergic reaction.
Precautionary Statements (P):
P202: Do not handle until all precautionary statements are read and understood.
P273: Avoid release to the environment.
P280: Wear protective gloves / protective clothing / eye protection / face protection.
P370 + P378: In case of fire: Use water spray, carbon dioxide, foam dry powder for extinction.
P501: Dispose of contents / container in accordance with local regulations.
EUH401: Follow the instructions for use to avoid risks to human health and the environment.
MATTERS TO BE CONSIDERED WHEN USING AND STORING:
When stored unopened in its original packaging under normal (cool and dry) conditions, there is no change in the physical, chemical and biological properties of the product outside the tolerance limits for 2 years.
The manufacturer guarantees the quality of the product, provided that it is sold in its original packaging. Manufacturer; The product cannot be held responsible for damage caused by improper storage, improper application, or lack of adherence to recommendations.
LICENSE OWNER AND MANUFACTURER COMPANY
ERTAR KİMYA Agricultural Products Tools Manufacturing Market. Singing. ve Tic. Ltd. Sti.
Acıdere OSB Mah. Zafer Cad. No: 8 Saricam / ADANA
Tel: 0 (322) 456 19 44 Fax: 0 (322) 456 19 47
PLANT AND HAZARDOUS ORGANISMS TO BE USED:
Harmful Organism Name
|Time Between Last Application and Harvest|
|Early leaf blight (Alternaria solani)||
50 ml / 100 L water
|Leaf mold (Fulvia fulva)||
50 ml / 100 L water
|Bond*||ashing(Erysiphe necator)||40 ml/100 L water||21 day|
(Alternaria alternata f. sp.citri)
|100 ml/100 L water||21 day|
|Grain powdery mildew
* It is not used in vineyards where harvest leaves will be harvested.