TRİESTE 50 EC

Explanation
PREPARATION OF PLANT PROTECTION PRODUCT FOR APPLICATION:

The plant protection product calculated over the recommended dosage is first mixed with some water in a separate container. The tank of the application machine is half filled with water. While the mixer of the machine is running, the mixture is added to the tank. The mixing is continued and the tank is completed with water. Mixing process continues until the application is completed. Use the prepared plant protection product on the same day.

CALIBRATION: Calibration of the application machine should be done before the application. The amount of mixture to be given to a certain area should be well adjusted in order to provide a good coating. Applications should be done in cool hours of the day in windless or less windy weather conditions.

CLEANING OF APPLICATION TOOLS:

Empty the application machine's tank safely immediately after the application is completed. After filling the tank with clean water, run the mixer and spray system to ensure all parts are washed. Do not wash near water sources. Do not discharge washing water and wastes into water sources.

PLANT PROTECTION PRODUCT USAGE:

Blue mold rot in citrus: Applications should be done before or after harvest. In the applications to be made before harvest, the time between the last application and the harvest should be considered. Care should be taken to cover the entire fruit surface in applications.

Lead mold in the vineyard:

1.application: It should be done at the beginning of the maturity of the grains.

and other applications: 15 days apart, considering the effectiveness of the plant protection product used.
Lead mold (Vegetables, Eggplant, Pepper, Cucumber) in vegetables:

Application is started when the first signs of disease are seen in the environment. Applications should be done 15 days apart.

Tomato early leaf blight:

Application should be started as soon as the first spots appear on both seedlings and field. When the climatic conditions are appropriate in the development of the disease, the application continues with an interval of 15 days depending on the course of the disease and the climatic conditions.

INFORMATION ABOUT RESISTANCE:

The plant protection product named TRİESTE 50 EC is a fungicide classified as Group G1: 3 according to its mechanism of action. Repetitive applications of plant protection products with the same mechanism of action promote resistance development. For this reason, to delay developing resistance, do not exceed total application number of TRIESTE 50 EC in the same production season. In cases where the application should be repeated, pay attention to the use of plant protection products with a different mechanism of action (other than Group G1: 3).

COMPARABILITY STATUS

It can be mixed with mixtures of captan, carboxin, carbendazim. Physical premix test is required.

• Read the label first.
• Do not use it at home.
• Keep away from children, food and animal feeds.
• Use a mask, protective suit, gloves and goggles.
• Do not eat, drink or smoke during the application of the plant protection product.
• Do not let people and animals enter the field for 1 day.
• To prevent risks to human and environmental health, use as recommended and at the recommended dosage.

USE OF THE RECOMMENDED PRODUCTS ARE ABSOLUTELY PROHIBITED.

Rinse thoroughly by placing clean water up to the inside of the empty packages of the product used. Pour the rinse water into the application tank. Repeat this process 3 times.

POISONING SYMPTOMS:

Headache, dizziness, irritation and vomiting of the skin

FIRST AID MEASURES:

AFTER INHALATION: Remove to fresh air. Get medical attention

AFTER THE SKIN CONTACT: Immediately take out the dishes on the plant protection product. Wash the body parts touching the plant protection product with plenty of water and soap for 15-20 minutes. If skin irritation persists, call a doctor. Wash contaminated clothing before use.

AFTER EYE CONTACT: Immediately wash the eyes and under the eyelids with plenty of water for 15 minutes. If contact lenses are used, remove them. Seek medical attention immediately.

AFTER SWALLOWING: If swallowed, seek medical advice with the product label or this information sheet. Never give anything by mouth to an unconscious patient and do not force them to induce vomiting.

ANTIDOTE AND TREATMENT:

It has no special antidote. Treatment is applied according to the symptoms. Wash the stomach, making sure that the stomach contents do not get into the respiratory tract.

CONTENTS:

Imazalil, Xylene, Aqnique BL

HAZARDOUS EXPRESSIONS (H):

H226: Flammable liquid and vapor

H302: Harmful if swallowed.

H312: Harmful in contact with skin.

H315: Causes skin irritation

H318: Causes serious eye damage

H319: Causes serious eye irritation

H332: Harmful if inhaled.

H400: Very toxic in the aquatic environment.

H410: Long-lasting, very toxic effect in the aquatic environment.

Precautionary Statements (P):

P210: Keep away from heat / No smoking

P273: Avoid release to the environment.

P280: Wear protective gloves / protective clothing, eye protection / face protection.

P303 + P361 + P353: IF ON SKIN (or hair): Remove / remove all contaminated clothing. Rinse your skin with water / shower.

P304 + P340: IF INHALED: If breathing is difficult, take victim to fresh air and keep it in a comfortable position for easy breathing.

P305 + P351 + P338: IF IN EYES: Carefully wash with water for several minutes. Remove contact lenses if fitted and easy to do. Continue rinsing

P370 + P378: IN FIRE CASE: use water spray, carbon dioxide, foam, dry powder for quenching.

P501: Dispose of contents / container in accordance with local regulations.

EUH401: Follow the instructions for use to avoid risks to human health and the environment.

MATTERS TO BE CONSIDERED WHEN USING AND STORING:

• It is poisonous to the fish. Do not contaminate underground and surface waters.
• It is poisonous to bees. Do not use the flowering period.
• Store the plant protection product in a separate place from food, feed, etc.
• The plant protection product is not phytotoxic when used according to the recommendations.
• Do not contaminate feed and foodstuffs with plant protection products.
• Empty plant protection product packaging should not be used for any other purpose.

STORAGE STATUS:

When stored unopened in its original packaging under normal (cool and dry) conditions, there is no change in the physical, chemical and biological properties of the mixture outside the tolerance limits for 2 years.

COMPANY STATEMENT:

The manufacturers guarantee the quality of plant protection products provided that they are sold in their original packaging. The manufacturers do not accept responsibility for damage caused by improper storage of plant protection products or deficiencies in following recommendations.

LICENSE OWNER AND MANUFACTURER COMPANY

ERTAR KİMYA Agricultural Products Tools Manufacturing Market. Singing. ve Tic. Ltd. Sti.

Acıdere Osb Mah. Zafer Cad. No: 8 Saricam / ADANA

Tel: 0 (322) 456 19 44 Fax: 0 (322) 456 19 47

info@ertarkimya.com.tr www.ertarkimya.com.tr

PLANT AND HAZARDOUS ORGANISMS TO BE USED:

* It is not used in vineyards where harvest leaves will be harvested.