VOYAGE 50 WP

Explanation
PREPARATION OF PLANT PROTECTION PRODUCT FOR APPLICATION

The plant protection product calculated over the recommended dosage is first mixed with some water in a separate container. The application machine tank is half filled with water. While the mixer of the machine is running, the mixture is added to the tank. The mixing is continued and the tank is completed with water. Mixing process continues until the application is completed. Use the prepared mixture on the same day.

Calibration

Before the application, the calibration of the application machine should be done.
Mixing amount should be adjusted to provide a good coating in applications. Applications should be done in cool hours of the day in windless or less windy weather conditions.

CLEANING OF THE SPRAYING MACHINE

Empty the sprayer tank safely immediately after the application is completed. After filling the tank with clean water, run the mixer and spray system to ensure that all parts are washed. Do not wash near water sources. Do not discharge washing water and wastes into water sources.

HOW TO USE THE PLANT PROTECTION PRODUCT:

Vineyard mildew: The first application should be started when the shoots reach 25-30 cm. Second and subsequent applications 1. Duration of application and development of the disease are applied with an interval of 10-15 days considering the meteorological factors.

Cucurbit mildew in cucumber: The application is started when the plants start to throw arms or with the first symptoms of mildew and it is continued at 7-10 days intervals depending on the severity of the disease. Applications should be made to cover all parts of the plant, especially under the leaves.

INFORMATION ABOUT RESISTANCE:

The plant protection product named VOYAGE 50 WP is a fungicide classified as Group 27 according to its mechanism of action. Repeated applications of plant protection products with the same mechanism of action promote resistance development. For this reason, to delay developing resistance, do not exceed the total number of applications recommended in the same season of VOYAGE 50 WP. In cases where the application should be repeated, pay attention to the use of plant protection products with a different mechanism of action (other than Group 27).

MIXTURE STATUS:

It can be mixed with many pesticides except alkaline ones like high acid and lime, burgundy slurry. However, whether a physical mixture is possible before a large scale mixture should be tested with a small diameter mixture.

  • Read the label first.
  • Do not use at home
  • Keep away from children, food and animal feeds.
  • Do not eat, drink or smoke during the application of the plant protection product.
  • Do not let people and animals enter the area where plant protection products are applied for 7 days.
  • To prevent risks to human and environmental health, use as recommended and at the recommended dosage.
  • It is strictly forbidden to use other than the recommended products.
  • POISONING SYMPTOMS

Dizziness, headache, weakness, sweating.

FIRST AID MEASURES

In case of Skin Contact; See. Precautionary Statements- (P303 + P361 + P353)

In Eye Contact; See. Precautionary Statements- (P305 + P351 + P338)

In case of inhalation; See. Precautionary Statements- (P304 + P340)

If Swallowed; If swallowed, seek medical advice with the product label or this information form. Never give anything by mouth to the unconscious patient and do not force them to vomit.

ANTIDOTE and TREATMENT

It has no special antidote. If necessary, treatment is applied according to the symptoms.

ANTIDOTE and TREATMENT

It has no special antidote. If necessary, treatment is applied according to the symptoms.

CONTENTS

cymoxanil
HAZARDOUS EXPRESSIONS (H)

H302: Harmful if swallowed.

H314: Causes severe skin burns and eye damage.

H315: Causes skin irritation.

H317: Causes allergic skin reactions.

H319: Causes serious eye irritation.

H361: Suspected of causing damage or reproductive damage to the unborn child.

H373: May cause damage to organs through prolonged or repeated exposure.

H400: Very toxic in the aquatic environment.

H410: Long-lasting, very toxic effect in the aquatic environment.

Precautionary Statements (P)

P202: Do not handle until all precautionary statements are read and understood.

P273: Avoid release to the environment.

P280: Wear protective gloves / protective clothing / eye protection / face protection.

P303 + P361 + P353: IF ON SKIN (or hair): Immediately remove / remove all contaminated clothing. Rinse your skin with water / shower.

P304 + P340: IF INHALED: If it is difficult to breathe, remove the victim to fresh air and keep it in a comfortable position for easy breathing.

P305 + P351 + P338: IF IN EYES: Rinse carefully with water for several minutes. Remove contact lenses if fitted and easy to do. Continue rinsing.

P405: Store locked up.

P501 Dispose of contents / container in accordance with local regulations.

EUH401: Follow the instructions for use to avoid risks to human health and the environment.

MATTERS TO BE CONSIDERED WHEN USING AND STORING

  • It is poisonous to the fish. Do not contaminate the waters.
  • It is poisonous to bees. Do not use during the flowering period.
  • Do not use empty plant protection product packages for any other purpose.

STORAGE STATUS

When stored under normal (cool and dry) conditions, there is no change in the physical, chemical and biological properties of the drug for 2 years outside the tolerance limits.

COMPANY STATEMENT

The manufacturers guarantee the quality of their medicines provided that they are sold in their original packaging. Manufacturers do not accept responsibility for any damage caused by improper storage of medicines or deficiencies in following recommendations.

LICENSE OWNER AND MANUFACTURER COMPANY

ERTAR KİMYA Agricultural Products Tools Manufacturing Market. Singing. ve Tic. Ltd. Sti.

Acıdere OSB Mah. Zafer Cad. No: 8 Saricam / ADANA

Tel: 0 (322) 456 19 44 Fax: 0 (322) 456 19 47

info@ertarkimya.com.tr www.ertarkimya.com.tr

PLANT AND HAZARDOUS ORGANISMS TO BE USED

Plant Name Harmful Organism Name Administration dose Time Between Last Application and Harvest
Cucumber Cucurbit mildew (Pseudoperonospora cubensis) 50 g/100 L water 3 day
vineyard* Mildio (Plasmopara viticola) 60 g/100 L water 7 day

(*) It is not used in vineyards where harvesting vine leaves will be harvested.