PREPARATION OF PLANT PROTECTION PRODUCT FOR APPLICATION:
The plant protection product calculated over the recommended dosage is first mixed with some water in a separate container. The tank of the application machine is half filled with water. Medicated water is added to the tank while the mixer of the machine is running. The mixing is continued and the tank is completed with water. Mixing process continues until the application is completed. Use the prepared plant protection product on the same day.
Before the application, the calibration of the application machine should be done. The amount of mixture to be given to a certain area should be well adjusted in order to provide a good coating. Applications should be done in cool hours of the day in windless or less windy weather conditions.
CLEANING OF APPLICATION TOOLS:
Empty the application machine's tank safely immediately after the application is completed. After filling the tank with clean water, run the mixer and spray system to ensure all parts are washed. Do not wash near water sources. Do not discharge washing water and wastes into water sources.
USAGE OF PLANT PROTECTION PRODUCT:
VINTAGE ASHTRAY (Erysiphe necator):
1st spraying: When the shoots are 25-30 cm before the flower,
2nd spraying: During the period when flower buds are separated before flowering,
3.Dispositions: During the period when the flower petals are falling and the small pellets of the groves are large,
4. and other sprayings: After the third spraying, depending on the duration of the drug used, the grains are made until I fall.
PEPPER (GREENHOUSE) CASTING: Spraying should be started when the first signs of disease are seen on the plants and, if necessary, continue spraying every 10-12 days.
1st spraying: When the flower eyes are blistering (3-5 days before in the branches with branch order)
2nd spraying: During the pink rosette bud (when the flowers are seen separately)
3rd spraying: When 70-80% of flower petals are shed
4. and other applications should be applied considering the duration of action of the drugs used when the climatic conditions are suitable for the progression of the disease.
INFORMATION ABOUT RESISTANCE:
The plant protection product named VOLITAN SUPER is a fungicide classified as Group G1: 3 according to its mechanism of action. Repetitive applications of plant protection products with the same mechanism of action promote resistance development. For this reason, to delay developing resistance, do not exceed total application number of VOLITAN SUPER during the same production season. In cases where the application should be repeated, pay attention to the use of plant protection products with a different mechanism of action (other than Group G1: 3).
It can be mixed with others except strong alkaline drugs. It is recommended to make a premix when mixing.
Although poisoning symptoms are not known, pay attention to general protection warnings.
ANTIDOTE and TREATMENT:
It has no special antidote. Treatment is applied according to the symptoms.
FIRST AID MEASURES:
After Inhalation: Move patient to fresh air. If breathing is irregular or stopped, administer artificial respiration. Keep the patient in a warm and comfortable place. Call a doctor or poison information center immediately.
After Skin Contact: Immediately take off any contaminated clothing. Wash the body parts that touch the medicine with plenty of water and soap for 15-20 minutes. If skin irritation persists, call a doctor. Wash contaminated clothing before using it.
After Eye Contact: Immediately wash the eyes and under the eyelids with plenty of water for 15 minutes. Remove contact lenses, if present. Get medical attention immediately.
After Swallowing: If swallowed, seek medical advice with the product label or this information form. Never give anything by mouth to the unconscious patient and do not force them to vomit.
HAZARDOUS EXPRESSIONS (H):
H226: Flammable liquid and vapor.
H302: Harmful if swallowed.
H312: Harmful in contact with skin.
H315: Causes skin irritation.
H318: Causes serious eye damage.
H319: Causes serious eye irritation.
H332: Harmful if inhaled.
H336: May cause drowsiness or dizziness.
H361d: Suspected of causing damage to the unborn child.
H411: Long lasting, toxic effect in the aquatic environment.
Precautionary Statements (P):
P273: Avoid release to the environment.
P280: Wear protective gloves / protective clothing / eye protection / face protection.
P304 + P340: IF INHALED: If it is difficult to breathe, remove the victim to fresh air and keep it in a comfortable position for easy breathing.
P305 + P351 + P338: IF IN EYES: Rinse carefully with water for several minutes. Remove contact lenses if fitted and easy to do. Continue rinsing.
P370 + P378: In case of fire: Use sputtering, carbon dioxide, foam, dry powder for extinction.
P405: Store locked up.
P501: Dispose of contents / container in accordance with local regulations.
EUH401: Follow the instructions for use to avoid risks to human health and the environment.
MATTERS TO BE CONSIDERED WHEN USING AND STORING:
When stored unopened in its original packaging under normal (cool and dry) conditions, there is no change in the physical, chemical and biological properties of the drug for 2 years outside the tolerance limits.
The manufacturers guarantee the quality of their medicines provided that they are sold in their original packaging. Manufacturers do not accept responsibility for any damage caused by improper storage of medicines or deficiencies in following recommendations.
LICENSE OWNER AND MANUFACTURER COMPANY
ERTAR KİMYA Agricultural Products Tools Manufacturing Market. Singing. ve Tic. Ltd. Sti.
Haci Sabanci Organize Sanayi Zafer Cad. No: 8 Saricam / ADANA
Tel: 0 (322) 456 19 45 Fax: 0 (322) 456 19 47
PLANT AND HAZARDOUS ORGANISMS TO BE USED:
Harmful Organism Name
|Time Between Last Application and Harvest|
15 ml/100 L water
|vineyard*||ashing(Erysiphe necator)||7.5 ml/100 L water||14 day|
30 ml/100 L water
(*) It is not used in vineyards where harvesting vine leaves will be harvested.