IMPACT OF THE PLANT PROTECTION PRODUCT:
POUNCE DF is a wide range contact fungicide. It is used as a prophylactic. If the disinfection agents are applied before entering the plant tissue, the best result is obtained.
PREPARATION OF THE PLANT PROTECTION PRODUCT FOR APPLICATION:
The plant protection product calculated over the recommended dosage is first mixed with some water in a separate container. The tank of the application machine is half filled with water. While the mixer of the machine is running, the mixture is added to the tank. The mixing is continued and the tank is completed with water. Mixing process continues until the application is completed. Use the prepared plant protection product on the same day.
Before the application, the application machine should be calibrated. The amount of mixture to be given to a certain area should be well adjusted in order to provide a good coating. Applications should be done in cool hours of the day in windless or less windy weather conditions.
CLEANING OF THE SPRAYING MACHINE:
Empty the sprayer tank safely immediately after the application is completed. After filling the tank with clean water, run the mixer and spray system to ensure all parts are washed. Do not wash near water sources. Do not discharge washing water and wastes into water sources.
USAGE OF PLANT PROTECTION PRODUCT:
vineyardMildiyö: The first application should be started when the shoots reach 25-30 cm. Second and subsequent applications The duration of the first application and the development status of the disease are applied with an interval of 10-15 days considering the meteorological factors.
vineyard Dead Arm:
When the application shoots are 2-3 cm,
When the application shoots are 8-10 cm,
Application shoots should be made in the circuit where it reaches 25-30 cm.
Tomato Mildio: It is started to be applied to the fight against medication with the appearance of white ash under the brown spots 3-5 mm in diameter in the surrounding tomato leaves or in places where the disease emerges every year when the conditions are suitable for the disease. The application is continued at 7-10 day intervals depending on the course of the disease and climatic conditions.
Tomato Early Leaf Blight: Application should be started as soon as the first spots appear on both seedlings and field. When the disease is suitable for the course of the disease and the development of the disease, the application continues with an interval of 7-10 days depending on the course of the disease and the climatic conditions.
Apple Pie: If there is no branch order
Application: When the flower is blindfolded (3-5 days before where there is a branch heat)
Application: During the pink rosette bud period (when the flowers are seen separately)
Application: When the flower petals fall 70-80%
And other applications should be done with an interval of 7-10 days depending on where the ecological conditions are suitable for the progression of the disease.
Brown Spot in Citrus: Applications are started when the shoots begin to develop, taking into account the development of the shoot and the climate characteristics, when it is about 5-10 cm long and when the first disease is seen. It is continued to be applied at intervals of 15-20 days in order to protect the newly formed parts of the growing shoots and leaves and young fruit from the disease, especially during the development of the shoot. The applications are terminated when the development of the shoot stops, the precipitation decreases and the temperatures increase and the fruit reaches a diameter of about 4 cm.
INFORMATION ABOUT RESISTANCE
Plant protection product named POUNCE DF is a fungicide classified as Group M: 3 according to its mechanism of action. Repetitive applications of plant protection products with the same mechanism of action promote resistance development. For this reason, to delay developing resistance, do not exceed the total number of applications recommended during the same season of POUNCE DF. In cases where the application should be repeated, pay attention to the use of plant protection products with a different mechanism of action (except Group M: 3).
It can be mixed with other fungicides and insecticides except bordo slurry. If the mixture is to be made, pre-mix should be done in a separate container.
Headache, nausea, weakness.
FIRST AID MEASURES
After Inhalation: Calm the patient, remove to fresh air, seek medical attention.
After Skin Contact: In case of skin contact, wash immediately with plenty of soap and water. If irritation occurs, get medical attention.
After Eye Contact: Immediately wash affected eyes under running water for at least 15 minutes, keeping eyelids open, consult an ophthalmologist.
After Swallowing: Immediately rinse your mouth and then call a doctor for plenty of water. Never give anything by mouth to the unconscious patient and do not force them to vomit.
ANTIDOTE and TREATMENT
It has no special antidote. Treatment is applied according to the symptoms.
HAZARDOUS EXPRESSIONS (H)
H302: Harmful if swallowed.
H317: Causes allergic skin reactions.
H332: Harmful if inhaled.
H400: Very toxic in the aquatic environment.
H410: Long-lasting, very toxic effect in the aquatic environment.
Precautionary Statements (P)
P261: Avoid breathing spray.
P273: Avoid release to the environment.
P280: Wear protective gloves / protective clothing / eye protection / face protection.
P301 + P312: IF SWALLOWED: Call the POISON CENTER or doctor / doctor if you feel unwell.
P302 + P352: IF ON SKIN: Wash with plenty of soap and water.
P304 + P340: IF INHALED: If breathing is difficult to take, bring the victim to fresh air and keep it in a comfortable position for easy breathing.
P391: Collect spillages.
P501: Dispose of contents / container in accordance with local regulations.
EUH401: Follow the instructions for use to avoid risks to human health and the environment.
MATTERS TO BE CONSIDERED WHEN USING AND STORING
When stored under normal (cool and dry) conditions, there is no change in the physical, chemical and biological properties of the product outside the tolerance limits for 2 years.
The manufacturers guarantee the quality of their products provided that they are sold in their original packaging. Manufacturers do not accept responsibility for any damage caused by incorrect storage of their products or deficiencies in following the recommendations.
LICENSE OWNER AND MANUFACTURER COMPANY
ERTAR KİMYA Agricultural Products Tools Manufacturing Market. Singing. ve Tic. Ltd. Sti.
Acıdere OSB Mah. Sanayi Zafer Cad. No: 8 Saricam / ADANA
Tel: 0 (322) 4561945 Fax: 0 (322) 4561947
PLANT AND HAZARDOUS ORGANISMS TO BE USED
|Plant Name||Harmful Organism Name||Administration dose||
Between the Last Application and Harvest
|200 g/100 L water||56 day|
|Dead arm(Phomopsis viticola)|
|150 g/100 L water||7 day|
|Early blight (Alternaria solani)||175 g/100 L water||7 day|
|200 g/100 L water||21 day|
|Citrus||Brown spot (Alternaria altermata f.citri)||250 g/100 L water||28 day|
(*) It is not used in vineyards where harvesting vine leaves will be harvested.