PREPARATION OF PLANT PROTECTION PRODUCT FOR APPLICATION:
The plant protection product calculated over the recommended dosage is first mixed with some water in a separate container. The tank of the application machine is half filled with water. While the mixer of the machine is running, mixed water is added to the tank. The mixing is continued and the tank is completed with water. Mixing process continues until the application is completed. Use the prepared plant protection product on the same day.
Before the application, the calibration of the application machine should be done. The amount of mixture to be given to a certain area should be well adjusted in order to provide a good coating. Applications should be done in cool hours of the day in windless or less windy weather conditions.
Drip system calibration: For the calibration of the drip system, the flow rate is measured by running 3 nozzles from the top and bottom for 10 minutes. Deviation should not exceed 10%. The amount of water required for the plant protection product to be given per decare is determined.
CLEANING OF THE SPRAYING MACHINE:
Empty the application machine's tank safely immediately after the application is completed. After filling the tank with clean water, run the mixer and spray system to ensure all parts are washed. Do not wash near water sources. Do not discharge washing water and wastes into water sources.
METHOD OF USING PLANT PROTECTION PRODUCT:
Application with strainer bucket: Immediately after the seeds are planted, a 3-liter mixture (creature) is applied to the soil surface with a strainer bucket or sprayer.
Application with drip irrigation in pepper: The amount of plant protection product calculated per decare is given to the soil by drip irrigation by operating the drip irrigation unit for 10 minutes. 1. Application is made 1 day after planting, 2. Application is made 30 days after the first application.
Banana application: After planting, 750 ml of plant protection product per decare is given to the soil by a suitable method (drip irrigation). The chemical control is not effective after the symptoms appear.
INFORMATION ABOUT RESISTANCE
Plant protection product named UNICORN 36 SL is a fungicide classified as Group A3: 32 according to its mechanism of action. Repetitive applications of plant protection products with the same mechanism of action promote resistance development. For this reason, to delay developing resistance, do not exceed total application number of UNICORN 36 SL recommended in the same season. In cases where the application should be repeated, pay attention to the use of plant protection products with a different mechanism of action (except for Group A3: 32).
Pre-mix experiment should be done without mixing with other plant protection products.
Rinse well by putting clean water up to ¼ in the empty packages of the product used. Pour the rinse water into the application tank. Repeat this process 3 times.
General signs of poisoning may appear. Headaches, dizziness, vomiting tremors, contractions, etc.
FIRST AID MEASURES
Inhalation: See Precautionary Statements - P304 + P340
In case of Skin Contact: Immediately take off contaminated clothing. Wash the body parts touching the product with plenty of water and soap for 15-20 minutes. If skin irritation persists, call a doctor. Wash contaminated clothing before use.
In case of Eye Contact: See Precautionary Statements - P305 + P351 + P338
In case of Ingestion: If swallowed, seek medical advice with the product label or this information form. Never give anything by mouth to the unconscious patient and do not force them to vomit.
ANTIDOTE and TREATMENT
It has no known antidote. Treatment is applied according to the symptoms.
HAZARDOUS EXPRESSIONS (H)
H302: Harmful if swallowed.
H318: Causes serious eye damage.
H332: Harmful if inhaled.
H412: Long lasting, harmful effect in aquatic environment.
Precautionary Statements (P)
P261: Avoid breathing spray.
P270: Do not eat, drink or smoke when using this product.
P273: Avoid release to the environment.
P280: Wear protective gloves / protective clothing / eye protection / face protection.
P304 + P340: IF INHALED: If it is difficult to breathe, remove the victim to fresh air and keep it in a comfortable position for easy breathing.
P305 + P351 + P338: IF IN EYES: Rinse carefully with water for several minutes. Remove contact lenses if fitted and easy to do. Continue rinsing.
P312: Call the POISON CENTER or doctor / doctor if you feel unwell.
P501: Dispose of contents / container in accordance with local regulations.
EUH401: Follow the instructions for use to avoid risks to human health and the environment.
MATTERS TO BE CONSIDERED WHEN USING AND STORING
When stored unopened in its original packaging under normal (cool and dry) conditions, there is no change in the physical, chemical and biological properties of the plant protection product for 2 years outside the tolerance limits.
The manufacturers guarantee the quality of plant protection products provided that they are sold in their original packaging. The manufacturer accepts no responsibility for any damage that may arise from the storage or improper use of plant protection products.
LICENSE OWNER AND MANUFACTURER COMPANY
ERTAR KİMYA Agricultural Products Tools Manufacturing Market. Singing. ve Tic. Ltd. Sti.
Acıdere Osb Mah. Zafer Cad. No: 8 Saricam / ADANA
Tel: 0 (322) 456 19 44 Fax: 0 (322) 456 19 47
PLANT AND HAZARDOUS ORGANISMS TO BE USED
|Plant Name||Harmful Organism Name||Administration dose||Time Between Last Application and Harvest|
|Tomato||Root and root rot in vegetable seedlings (Fusarium spp., Phythium spp.)||150 ml / 100 L water (3 liters / m2 creature)||7 day|
(Fusarium spp., Pythium spp.)
|200 ml/100 L water
(3 liters / m2 creature)
|Pepper (Greenhouse)||Soil-based disease factors
with drip irrigation
|Cucumber||Wilting and root rot in Cucurbitaceae (Fusarium spp., Pythium spp.)||300 ml/100 L water
(3 liters / m2 creature)
(Fusarium oxysporium f.spcubense)
with drip irrigation