ERTAR CAPTAN 50 SC

Explanation
PREPARATION OF PLANT PROTECTION PRODUCT FOR APPLICATION

The plant protection product calculated over the recommended dosage is first mixed with some water in a separate container. The tank of the application machine is half filled with water. While the mixer of the machine is running, the mixture is added to the tank. The mixing is continued and the tank is completed with water. Mixing process continues until the application is completed. Use the prepared plant protection product on the same day.

Calibration:

Before the application, the calibration of the application machine should be done. The amount of mixture to be given to the specific area should be well adjusted in order to provide a good coating in the application. Applications should be done during the cool hours of the day in windless or less windy weather conditions.

CLEANING OF THE SPRAYING MACHINE:

Empty the sprayer tank safely immediately after the application is completed. After filling the tank with clean water, run the mixer and spray system to ensure that all parts are washed. Do not perform washing operations beside water sources. Do not discharge washing water and wastes into water sources.

HOW TO USE THE PLANT PROTECTION PRODUCT:

vineyard MİLDİYÖ: The first application should be started when the shoots reach 25-30 cm. Second and subsequent applications 1. The duration of the drug and the state of development of the disease are applied with an interval of 10-15 days, taking into account the meteorological factors.

APPLE CHART: Chemical control: Spraying times

Application: When the flower is blindfolded (3-5 days before where there is a branch heat)
Application: During the pink rosette bud period (when the flowers are seen separately)
Application: When the flower petals fall 70-80%
and other applications: If the climatic conditions are suitable for the progression of the disease, it should be applied by taking into account the duration of the drugs used.


TOMATO EARLY LEAF BURN: Application should be started as soon as the first spots appear on both seedlings and field. When the climatic conditions are suitable for the development of the disease, the application is continued at 10-12 day intervals depending on the course of the disease and the climatic conditions.

DRILLING APRICOT:

Application: Immediately after fall fall,
Application: Before the flower buds open in the spring (during the pink flower bud period)
Application: The leaf and the male organ plate should be made while peeling on the fruit tip.


INFORMATION ABOUT RESISTANCE

Plant protection product named ERTAR CAPTAN 50 SC is a fungicide classified as Group M: 4 according to its mechanism of action. Repetitive applications of plant protection products with the same mechanism of action promote resistance development. For this reason, to delay developing resistance, do not exceed the total number of applications recommended in the same season of ERTAR CAPTAN 50 SC. In cases where the application should be repeated, pay attention to the use of plant protection products with a different mechanism of action (except group M: 4).

MIXTURE STATUS

It should not be mixed with alkaline and oily plant protection products. It is recommended to make a premix trial before mixing it with other plant protection products.

  • Read the label first.
  • Do not use at home
  • Keep away from children, food and animal feeds.
  • Do not eat, drink or smoke during the application of the plant protection product.
  • Do not let people and animals enter the field for 1 day.
  • To prevent risks to human and environmental health, use as recommended and at the recommended dosage.
  • It is strictly forbidden to use other than the recommended products.
  • Rinse well by putting clean water up to ¼ in the empty packages of the product used. Pour the rinse water into the application tank. Repeat this process 3 times.

POISONING SYMPTOMS

It can irritate the skin, eyes, nose and throat. May cause breathing difficulties and tears.

FIRST AID MEASURES

In case of inhalation; Take the victim to fresh air. If not breathing, apply artificial respiration. Get medical attention.

In case of Skin Contact; Immediately wash with soap and plenty of water. Consult the medical staff. Take off contaminated clothing immediately and wash before reuse. Discard other leather items such as belts and watch apricots.

In Eye Contact; Wash with plenty of water. Get medical attention.

If Swallowed; Call a doctor or poison information center immediately. Do not induce vomiting. Immediately milk egg whites, gelatin solutions or water, if this is not available, drink large quantities of water. Avoid alcohol.

ANTIDOTE and TREATMENT

It has no special antidote. If necessary, treatment is applied according to the symptoms.

CONTENTS

from 1.Cap

HAZARDOUS EXPRESSIONS (H)

H302: Harmful if swallowed.

H317: Causes allergic skin reactions.

H318: Causes serious eye damage.

H331: Toxic if inhaled.

H351: Suspected of causing cancer.

H400: Very toxic in the aquatic environment.

EUH208: Contains Captan and Carboxymethy cellulos. May cause an allergic reaction.

Precautionary Statements (P)

P202: Do not handle until all precautionary statements are read and understood.

P273: Avoid release to the environment.

P280: Wear protective gloves / protective clothing / eye protection / face protection.

P302 + P352: IF ON SKIN: Wash with plenty of soap and water.

P304 + P340: IF INHALED: If it is difficult to breathe, remove the victim to fresh air and keep it in a comfortable position for easy breathing.

P305 + P351 + P338: IF IN EYES: Rinse carefully with water for several minutes. Remove contact lenses if fitted and easy to do. Continue rinsing.

P405: Store locked up.

P501: Dispose of contents / container in accordance with local regulations.

EUH401: Follow the instructions for use to avoid risks to human health and the environment.

MATTERS TO BE CONSIDERED WHEN USING AND STORING

  • It is poisonous to the fish. Do not contaminate underground and surface waters.
  • It is poisonous to bees. Do not use during the flowering period.
  • Do not smear product residues in streams, lakes, pool waters and fountain troughs.
  • It is not used with oily plant protection products.
  • It is essential to follow general protection measures during application.
  • Do not use empty packaging for any other purpose after use.

STORAGE STATUS

When stored under normal (cool and dry) conditions, there is no change in the physical, chemical and biological properties of the product outside the tolerance limits for 2 years.

COMPANY STATEMENT

The manufacturers guarantee the quality of their products provided that they are sold in their original packaging. Manufacturers do not accept responsibility for any damage caused by incorrect storage of their products or deficiencies in following the recommendations.

LICENSE OWNER AND MANUFACTURER COMPANY

ERTAR KİMYA Agricultural Products Tools Manufacturing Market. Singing. ve Tic. Ltd. Sti.

Acıdere Osb Mah. Chad. No: 8 Saricam / ADANA

Tel: 0 (322) 456 19 45 Fax: 0 (322) 456 19 47

info@ertarkimya.com.tr www.ertarkimya.com.tr

PLANT AND HAZARDOUS ORGANISMS TO BE USED:

Plant Name Harmful Organism Name Administration dose Time Between Last Application and Harvest
Apple Karaleke (Venturia inaequalis) 150 ml/100 L water 3 day
Bond* Downy mildew

(Plasmopara viticola)

300 ml/100 L water 3 day
Tomato Early blight(Alternaria solani) 300 ml/100 L water 7 day
Apricot Leaf-piercing in stone fruits

(Wilsonomyces carpophylus)

300 ml/100 L water 7 day

(*) It is not used in vineyards where harvesting vine leaves will be harvested.