WAİTDOOR SC 500

Explanation
PREPARATION OF THE PLANT PROTECTION PRODUCT FOR APPLICATION

The plant protection product calculated over the recommended dosage is first mixed with some water in a separate container. The tank of the application machine is half filled with water. While the mixer of the machine is running, the mixture is added to the tank. The mixing is continued and the tank is completed with water. Mixing process continues until the application is completed. Use the prepared plant protection product on the same day.

Calibration

Before the application, the calibration of the application machine should be done. The amount of mixture to be given to a certain area should be well adjusted in order to provide a good coating. Applications should be done in cool hours of the day in windless or less windy weather conditions.

CLEANING OF THE SPRAYING MACHINE

Empty the sprayer tank safely immediately after the application is completed. After the tank is filled with clean water, run the mixer and spray system to ensure all parts are washed. Do not wash near water sources. Do not discharge washing water and wastes into water sources.

HOW TO USE THE PLANT PROTECTION PRODUCT

Lead mold in tomato: Application should be started when the first signs of disease are seen in the environment or during the flowering phase. Applications should be done with an interval of 10 days.

Bond lead mold: First application should be started just before the beginning of maturation of the products and 2 applications should be made after 21 days. Attention should be paid to the time between the last application and harvest.

Strawberry lead mold: 1. Application; 2. Application when 10% of the first flowers open; When 50% of the flowers open, 3. Application; It should be done in the period when the first green fruits are seen.

INFORMATION ABOUT RESISTANCE

Plant protection product named WAİTDOOR SC 500 is a fungicide classified as Group G3: 17 according to its mechanism of action. Repetitive applications of plant protection products with the same mechanism of action promote resistance development. For this reason, in order to delay resistance development, do not exceed total application number of WAITDOOR SC 500 in the same season. In cases where the application should be repeated, pay attention to the use of plant protection products with a different mechanism of action (except for Group G3: 17).

MIXTURE STATUS

WP can be mixed with formulations. It is necessary to conduct a preliminary trial with other formulations. It is not mixed with highly acidic and basic formulations.

  • Read the label first.
  • Do not use it at home.
  • Keep away from children, food and animal feeds.
  • Do not eat, drink or smoke during the application of the plant protection product.
  • Do not put people and animals in the field where plant protection product is applied for 2 hours.
  • To prevent risks to human and environmental health, use as recommended and at the recommended dosage.
  • It is strictly forbidden to use other than the recommended products.

Rinse thoroughly by pouring clean water into empty packages until the product is used. Pour the rinse water into the application tank. Repeat this process 3 times.

POISONING SYMPTOMS

General signs of poisoning may appear.

FIRST AID MEASURES

After Inhalation: Move patient to fresh air. If breathing is irregular or stopped, administer artificial respiration. Keep the patient in a warm and comfortable place. Contact a doctor or poison information center immediately.

After Skin Contact: Skin should be washed immediately with plenty of water and soap, if any, should be washed with polyethylene glycol 400 followed by plenty of water.

After Eye Contact: Immediately wash the eyes and under the eyelids with plenty of water for 15 minutes. Remove contact lenses, if present. Get medical attention immediately.

After Swallowing: If swallowed, seek medical advice with the product label or this information form. Never give anything by mouth to the unconscious patient and do not force them to vomit.

ANTIDOTE and TREATMENT

It has no special antidote. Treatment is applied according to the symptoms.

CONTENTS

fenhexamid

HAZARDOUS EXPRESSIONS (H)

H302: Harmful if swallowed.

H318: Causes serious eye damage.

H411: Long lasting, toxic effect in the aquatic environment.

Precautionary Statements (P)

P273: Avoid release to the environment.

P280: Wear protective gloves / protective clothing / eye protection / face protection.

P301 + P312: IF SWALLOWED: Call the POISON CENTER or doctor / doctor if you feel unwell.

P302 + P352: IF ON SKIN: Wash with plenty of soap and water.

P304 + P340: IF INHALED: If it is difficult to breathe, remove the victim to fresh air and keep it in a comfortable position for easy breathing.

P305 + P351 + P338: IF IN EYES: Rinse carefully with water for several minutes. Remove contact lenses if fitted and easy to do. Continue rinsing.

P405: Store locked up.

P501: Dispose of contents / container in accordance with local regulations.

EUH401: Follow the instructions for use to avoid risks to human health and the environment.

MATTERS TO BE CONSIDERED WHEN USING AND STORING

  • It is poisonous to fish. Do not contaminate underground and surface waters.
  • It is poisonous to the bees, do not use the time of flowering.
  • Do not apply in windy weather.
  • Use the entire creature with a plant protection product on the field.
  • Do not use empty product packaging for any other purpose.
  • Shake the bottle well before use.

STORAGE STATUS

When stored under normal (cool and dry) conditions, there is no change in the physical, chemical and biological properties of the product outside the tolerance limits for 2 years.

COMPANY STATEMENT

The manufacturers guarantee the quality of the products provided that they are sold in their original packaging. The manufacturers do not accept responsibility for any damage caused by faulty storage of the products or deficiencies in following the recommendations.

LICENSE OWNER AND MANUFACTURER COMPANY

ERTAR KİMYA Agricultural Products Tools Manufacturing Market. Singing. ve Tic. Ltd. Sti.

Acıdere OSB Mah. Sanayi Zafer Cad. No: 8 Saricam / ADANA

Tel: 0 (322) 4561945 Fax: 0 (322) 4561947

info@ertarkimya.com.tr www.ertarkimya.com.tr

PLANT AND HAZARDOUS ORGANISMS TO BE USED

Plant Name Harmful Organism Name Administration dose Time Between Last Application and Harvest
Tomato Bullet mold (Botrytis cinerea) 100 ml/100 L water 7 day
vineyard* Bullet mold (Botrytis cinerea) 100 ml/100 L water 7 day
Strawberry Bullet mold (Botrytis cinerea) 100 ml/100 L water 3 day

(*) It is not used in vineyards where vine leaves will be harvested for consumption.