PREPARATION OF PLANT PROTECTION PRODUCT FOR APPLICATION:
The plant protection product calculated over the recommended dosage is first mixed with some water in a separate container. The tank of the application machine is half filled with water. While the mixer of the machine is running, the mixture is added to the tank. The mixing is continued and the tank is completed with water. Mixing process continues until the application is completed. Use the prepared plant protection product on the same day.
Seed application can be done with a rotary application canister or a seed application machine working on the spray principle. In the absence of suitable equipment, the seeds are spread on a flat surface and applied in a way to provide a homogeneous coating. It is recommended to repeat the seeder setting with the medicated seed before planting, as the sprayed seed can change the previous seeder setting. After use, the application tool should be thoroughly cleaned.
Before the application, the calibration of the application machine should be done. Mixing amount should be adjusted to provide a good coating in applications. Applications should be done in cool hours of the day in windless or less windy weather conditions.
Drip irrigation system calibration: For the calibration of the drip system, the flow rate is measured by running 3 nozzles from the beginning and the end for 10 minutes. Deviation should not exceed 10%. The amount of water required for the plant protection product to be given per decare is determined.
CLEANING OF THE SPRAYING MACHINE:
Empty the sprayer tank safely immediately after the application is completed. After filling the tank with clean water, run the mixer and spray system to ensure that all parts are washed. Washing process
do not do near water sources. Do not discharge washing water and wastes into water sources.
HOW TO USE THE PLANT PROTECTION PRODUCT:
If the application is to be applied with a cask (cascade), 150 g of the product recommended for 100 kg of seeds are added to the application barrel several times in a container after mixing well with enough water in a container. It is provided.
In sectors with application equipment, the amount of water that will provide an ideal coating of the seed is made by making a preliminary trial. The ideal amount of water is the amount of water that covers the seed but does not flow. After this is achieved, the required amount is mixed thoroughly with water and the application device is placed in the tank and applied. Do not use seeds with low germination capacity, peeled or cracked, not suitable for planting. Seed application equipment can cause problems at very cold (below 0 ° C) temperatures. Semes 50 WP should be applied at temperatures above 0 ° C.
Root and seedling root rot in carnation:
The application should be started as soon as the first signs of disease appear. 1 week after seedlings are taken into soil, 2 grams per square meter will be applied in a single application.
Root and root rot in vegetable seedlings:
Applications are made in the form of seed and soil spraying.
Seed spraying; It is applied to the seed before planting.
Soil spraying; It is carried out before planting, after planting, after the seedlings emerge into the soil, and after the seedlings are taken to the greenhouse or field.
Life water application: After the seedlings are surprised, the application is done in the form of life water.
INFORMATION ABOUT RESISTANCE
The plant protection product named SEMES 50 WP is a fungicide classified as Group M3- F3: 14 according to its mechanism of action. Repeated applications of plant protection products with the same mechanism of action promote resistance development. For this reason, in order to delay the development of resistance, do not exceed the total number of applications recommended in the same season of SEMES 50 WP. In cases where the application should be repeated, pay attention to the use of plant protection products with a different mechanism of action (except Group M3- F3: 14).
Before mixing with insecticide, fungicide, liquid fertilizers, it is recommended to make a pre-mix experiment. It should be used without waiting after it is mixed with alkali fertilizers.
Irritation of the eyes, nose, throat and skin, dizziness and pain, weakness, inability to see clearly, nausea.
FIRST AID MEASURES
After Inhalation: Move from contaminated area to clean area. If any symptoms occur and persist, consult a doctor.
After Skin Contact: Immediately take off any contaminated clothing. Wash the body parts of the medicine with plenty of water and soap for 15-20 minutes. If skin irritation persists, call a doctor. Wash contaminated clothing before using it.
After Eye Contact: Immediately wash the eyes and under the eyelids with plenty of water for 15 minutes. Remove contact lenses, if present. Get medical attention immediately.
After Swallowing: If swallowed, seek medical advice with a product label or information form. Never give anything by mouth to the unconscious patient and do not force them to vomit.
ANTIDOTE and TREATMENT
It has no special antidote. Treatment is applied according to the symptoms. In mild poisonings ATROPIN SULPHATE and 2 PAM are given.
HAZARDOUS EXPRESSIONS (H)
H314: Causes severe skin burns and eye damage.
H315: Causes skin irritation.
H317: Causes allergic skin reactions.
H319: Causes serious eye irritation.
H400: Very toxic in the aquatic environment.
H410: Long-lasting, very toxic effect in the aquatic environment.
Precautionary Statements (P)
P261: Avoid breathing spray.
P273: Avoid release to the environment.
P280: Wear protective gloves / protective clothing / eye protection / face protection.
P405: Store locked up.
P501 Dispose of contents / container in accordance with local regulations.
EUH208: Contains Tolclofos-methyl. May cause an allergic reaction.
EUH401: Follow the instructions for use to avoid risks to human health and the environment.
MATTERS TO BE CONSIDERED WHEN USING AND STORING
When stored unopened in its original packaging under normal (cool and dry) conditions, there is no change in the physical, chemical and biological properties of the product for 2 years outside the tolerance limits.
The manufacturers guarantee the quality of their products provided that they are sold in their original packaging. The manufacturers do not accept responsibility for any damage caused by incorrect storage of their products or deficiencies in following the recommendations.
LICENSE OWNER AND MANUFACTURER COMPANY
ERTAR KİMYA Agricultural Products Tools Manufacturing Market. Singing. ve Tic. Ltd. Sti.
Acıdere Osb Mahallesi Zafer Cad. No: 8 Saricam / ADANA
Tel: 0 (322) 4561945 Fax: 0 (322) 4561947
PLANT AND HAZARDOUS ORGANISMS TO BE USED
|Plant Name||Harmful Organism Name||Administration dose||Time Between Last Application and Harvest|
|Wheat||Drive(Tilletia spp.)||150 g/100 kg seed||—|
|Clove||Crumble and root rot
(Pythium debaryanum, Rhizoctonia solani, Thielaviopsis basicola)
|Vegetable Seedlings||Crumble and root rot
(Pythium spp., Rhizoctonia spp., Fusarium spp.,Alternaria spp., Sclerotinia spp., Phytophthora spp.)
|1000 g / da
Life Water Application