Plant Disease Harmful Weed Latin Name Application Dose and Period Time Between Last Application and Harvest
Plants Not Grown
Vicious bromine (Bromus sterilis) 400 ml/da
Orange daffodil (Calendula arvensis)
Turn dad (Erodium cicutarium)
One-year bunch (Poa annua)
Wedding flower (Ranunculus repens)
Pike beak (Geranium dissectum)
(Digitaria sanguinalis)
Wall barley (Hordeum murinum)
Shepherd's purse (Capsella bursa-pastoris)
Wild cress (Cardaria draba)
Dandelion (Taraxacum officinale)
dead nettle (Lamium amplexicaule)
Potato Leaf drying before harvest

200 ml / da

14 day

Preparation of the drug for application: First, the tank of the sprayer is filled halfway with water. The required drug is slurried in another container with little water and added to the tank. Remaining water is added by operating the mixing apparatus of the instrument.

Calibration is done first to calculate the amount of water to be used per decare. For this, a certain amount of water is put into the tank of the tool and it is calculated by running at a constant speed in the field conditions, how much area can be wetted with the existing water. From here, how much water will be spent per decare is calculated with the calibrated tool. Then spraying is started.


Weed Struggle in Cultivated Crops:

RENOVE is a total herbicide applied after exiting. For this reason, utmost care should be taken not to contact the cultivated plants during the application. Application should not be done in windy weather.

The mixture prepared for use is sprayed on weeds. The best result is obtained by applying during the period when weeds are actively growing.

Leaf Dryer Before Harvesting in Potato:

Topics to be Considered Before Application: Care should be taken to prevent the plant from suffering water stress. For this, a simple soil moisture test should be carried out. Planting ridges should be opened in 10 different places by zig-zag in the field, and soil samples should be taken 5 cm below the bottom lump. Application can be made if the soil sample remains in the form of a ball when slightly squeezed by hand. If dispersed, moisture is not sufficient and application should not be performed. It can be thrown with all kinds of high / low volume ground tools. However, it is not recommended to be discarded with an ultra low-volume (ULV) tool. It is recommended to use a flat fan type nozzle for high efficiency. A good coating should definitely be made and should not be thrown by fogging. Clean water should always be used. There is no permanence in the soil. Therefore, the crop plant can be planted immediately after application. Since the plant is quickly taken by its green parts, it is not affected by the rain falling 30 minutes after application. If the green parts are covered with possible excessive dust in extremely dry areas, the application should be abandoned. A few days should be waited for the soil to be adequately moistened with rain or irrigation water. It is not applied with any irrigation system.

METHOD OF APPLICATION: The first application should be done at 200 ml / da dose 4 weeks before harvest, and the second application at a dose of 300 ml / da 1 week after the first. Thus, gradual and slow drying is ensured, and normal peel formation is allowed in the potato and the plant is not prevented from underlying again. 20- 40 liters of water should be applied per decare. The pressure of the application tool should be 2-3 bar.

Harvest Time: After the first application in potato, 3-4 days later the leaves are poured rapidly. The body may take 10-14 days to dry. Since it will also kill existing weeds during the application, it encourages the potato to reach maturity and harvest. Although the rate of action slows down in cool weather, this does not affect the performance of the crop protection product.


It does not need to be mixed with other drugs.