ACTİVİZİM 50 EC

PREPARATION FOR APPLICATION:

The required amount of drug is mixed with a small amount of water in a suitable container. Two thirds are added into the spraying tank filled with water and mixed. The tank is then completed with water. Calibration is done first to calculate the amount of water to be used per decare. For this, a certain amount of water is put into the tank of the tool and it is calculated by running at a constant speed in the field conditions, how much area can be wetted with the existing water. From here, how much water will be spent per decare is calculated with the calibrated tool. Spraying should be done when the air is cool and calm.

ACTIVIZATION 50 EC has a strong fumigant effect as well as its effect through stomach and contact. Back atomizers, back bags, can be applied with pulverizers that can be mounted on the tractor. Situations where the air temperature is above 32 ° C are not suitable for plane spraying. In spraying with an atomizer, 4 times more medication should be added than normal considering the capacity of the medication tank of the instrument. In the disinfection of empty warehouses, after the warehouses are thoroughly swept and cleaned, all surfaces including ceiling and floor must be sprayed thoroughly. The sprayings to be made in the field should be repeated every 7–14 days depending on the pest's condition.

MIXTURE STATUS:

Although ACTIVIZATION 50 EC drug can be mixed with many insecticides and fungicides, it is recommended to perform simple mixture tests before preparing large amounts of mixtures.